SCHEDULE OF ICME2003

 

26 Dec 2003, Friday

 

   8:30 –  9.15 AM                  Inaugural Session  (BUET Auditorium)     

Chief Guest : Mr. Shahjahan Siraj, MP,

Honourable Minister of Environment and Forest

                                                Special Guest : Prof. Alee Murtuza, VC., BUET

 

  9:30 – 10:30 AM                  Opening of Exhibition  (BUET Playground)     

 

10:30 – 11:00 AM                  Tea-Break

 

Session 1.1                        Session Chr : Prof. M.H. Khan

 

11:00 – 11:45 AM                  Keynote Paper : ICME-03-KEY-04              (A - Council Bld)

 

                                    Characteristics of Quenching High Temperature Surface With Impinging Jet

Prof. Masanori Monde

 

11:45 – 12:30 PM                  Keynote Paper : ICME-03-KEY-03            (A - Council Bld)

 

Development of Microchannel Heat Exchanger For Magnetic Refrigeration Applications           

                                    Prof. Muhammad Mustafizur Rahman , Shantanu Sudhir Shevade

                       

12:30 – 2:15 PM                  Prayer and Lunch-Break

 

  2:15 –  3:30 PM                  Session 1.2A             Session Chr : Prof. S.M.N. Islam

                                                                                     5 papers = 5  x 15min

 

Paper Number

Time

Title and Author

ICME03-TH-01

2:15

Study of Heat Transfer and Fluid Dynamics Predictions of a Lawn Mower Tractor Exhaust System

Md Shamim Reza, P.A. Hagen, R. S. Amano

ICME03-TH-02

2:30

Analysis of Temperature Distribution In Grinding of Composites Using Finite Element Method

Sundaram. S, Anantharaman. N., Ravikumar. K, Vijay Anand. S.

ICME03-TH-03

2:45

Thermohydraulic Performance of Pebble Bed Solar Air Heaters

B. Paul, J.S. Saini

ICME03-TH-04

3:00

Nucleate Pool Boiling Heat Transfer in Different Metals of Heating Surfaces with Different Liquids

P. Indreswaraiah,  K. Govinda Rajulu, D. Subbarayudu

ICME03-TH-05

3:15

Evaluation of Heat and Mass Transfer Coefficients for a Vertical Tube Absorber

Muhammad Elias, N.E. Wijeysundera, M.N.A. Hawlader

 

 

  2:15 –  3:30 PM                  Session 1.2B             Session Chr : Prof. A. C. Mandal

                                                                                     5 papers = 5  x 15min

 

Paper Number

Time

Title and Author

ICME03-AM-01

2:15

Experimental Method For Forecasting The Wear Rate Of A Journal Bearing And Its Variation With Clearance Space           

Sachindra Mahato, Sandeep Singh, Sutanu Samanta

ICME03-AM-02

2:30

Failure Analysis of 18-Inch Diameter Gas Pipe Line

Faizul Hasan, Javed Iqbal

ICME03-AM-03

2:45

Effect Of Cryogenic Treatment On Dimensional Stability

Of Ball Bearing

P.Hariharan, S.Mohan, A.Raja Durai

ICME03-AM-04

3:00

Investigation on Failure of Cylinder Jet Dyeing Machine

C. K. Desai, Dr. D.P.Vakharia, Dr. S.A.Channiwala

ICME03-AM-05

3:15

Prediction Of Fatigue Crack Initiation And Propagation Life For A Pipe Using Fracture Mechanics

S. S. Paradhe, K. D. Shah, G.S. Swami, G. J. Sawaisarje

 

 

 

  2:15 –  3:30 PM                  Session 1.2C             Session Chr : Prof. M. M. Rahman                                                                              5 papers = 5  x 15min

 

Paper Number

Time

Title and Author

ICME03-FL-01

2:15

Experimental And Computational Fluid Dynamic (Cfd) Studies On Half-Model Transport Aircraft

Mr. Iskandar Shah Bin Ishak, Shabudin Bin Mat, Dr. Tholudin Bin Mat Lazim, Mohd Zailani Bin Awang

ICME03-FL-02

2:30

Hysteresis Phenomena Appearing in the Performance of Wells Turbine

M. Mohammad, Y. Kinoue, T. Setoguchi, K. Kaneko1, A.K.M.S. Islam    

ICME03-FL-03

2:45

Effect of NPR (Nozzle Pressure Ratio) in a Suddenly Expanded Flow

S.A. Khan, M. Farooq, S. A. Khan, E. Rathakrishnan

ICME03-FL-04

3:00

CFD Approach For Modelling Of Cook Stoves.

Dr.W.M.S.R.Weerasinghe, U.D.L.Kumara

ICME03-FL-05

3:15

Three Dimensional Analysis and Application of A

Line Solver for the Recirculating Flows Using

Multigrid Methods.

T. M. Shah

 

 

 

  3:30 – 3:45 PM                  Tea-Break

 

  3:45 – 5:00 PM                  Session 1.3A             Session Chr : Prof. M. A. Nur

                                                                        5 papers = 5  x 15min

 

Paper Number

Time

Title and Author

ICME03-TH-06

3:45

Exhaust gas after treatment by absorption system to reduce odor at idealy in DI diesel engine

Murari Mohan Roy, M. Shahed H. Khan, M. Masud-ul-Hasan, Shamsunnahar

ICME03-TH-08

4:00

Modeling of Heat Losses from Combustion Chamber of Diesel Engines

M. Nikian, M. Naghashzadegan, S.K.Arya

ICME03-TH-09

4:15

Development of Direct Methanol Injection for a

Two-Stroke Si Engine for Optimum Performance

 D.B. Ganesh ,S.Kumarappa, G.P. Prabhukumar

ICME03-TH-16

4:30

Fixed Bed Pyrolysis of Sugarcane Baggage for Liquid Fuel Production       

Mohammad Rofiqul Islam, Md. Nurul Islam, Mohammad Nurul Islam

ICME03-TH-31

4:45

Production and Characterization of Scrap Tyre Pyrocysis Oil And Its Blend

M. N. Islam, M.F.R Khan , M. Z. Alam

 

 

 

  3:45 – 5:00 PM                  Session 1.3B                    Session Chr : Prof. M. A. Azim

                                                                        5 papers = 5 papers x 15min

 

Paper Number

Time

Title and Author

ICME03-AM-06

3:45

A Novel Approach In The Determination Of Work Standards For A Manufacturing Plant

S.A. Oke, D.Kalyanaraman

ICME03-AM-07

4:00

Optimization of Product Mix in a Typical Yarn Manufacturing Industry

S. Mainul Hasan, A. N. Mustafizul Karim

ICME03-AM-08

4:15

Microstructure development for Extrusion – NARMA_L2 Control Approach

M. Seeman, D. Katherasan, V. Kalaichelvi, R Karthikeyan

ICME03-AM-09

4:30

Parametric study of the Sheet Metal Forming Processes using Adaptive Refinement Techniques

Mohd. Ahmed, G.S. Sekhon, Devender Singh

ICME03-AM-10

4:45

Design and Development of a Portable Copra Dryer

Prof. M A Satter

 

 

 

 

 

 

3:45 – 5:00 PM                  Session 1.3C             Session Chr : Prof. M. M. Helali

                                                                        5 papers = 5 papers x 15min

 

Paper Number

Time

Title and Author

ICME03-AM-11

3:45

Wire Failure Analysis In Wire-Edm Process     

Dr.B.J.Ranganath, Dr.K.G.Sudhakar, A.S.Srikantappa

ICME03-AM-13

4:00

Processing – Mechanical And Wear Properties Of Aluminium Based Metal Matrix Composite Synthesized Using Vortex Method.

Ramachandra M., Radhakrishna K.

ICME03-AM-14

4:15

Delamination Initiation In Frp Laminated Composites Under Low Velocity Impact

Manish Khandelwal , D Chakraborty , U S Dixit

ICME03-AM-15

4:30

Wear Properties of Aluminum – Silicon

Eutectic Alloy  

Tuti Y. Alias, M.M. Haque

ICME03-AM-16

4:45

Numerical Solutions Of Short Cantilever Beams Subjected To End Moment

Md. Iftekher Rahman, S. R Ahmed

 

 

  7:00 PM                                 Dinner (Sponsored by : Unocal Bangladesh Ltd.)

 

 

____________________________________________________________________

 

 

 

27 Dec 2003, Saturday

 

Session 2.1            Session Chr : Prof. A. M. Aziz-ul-Huq

 

9:00 –   9:45 AM                  Keynote Paper : ICME-03-KEY-01            (A - Council Bld)

 

                                    Flow Characteristics Related To Arterial Diseases

Prof. Niranjan K. Talukder

 

 

9:45 – 10:30 AM                  Keynote Paper : ICME-03-KEY-05            (A - Council Bld)

 

                                    Estimating Extra Water From Spray Turbines as a Function of Boundary Layer Temperature and Humidity

Prof. S H Salter

 

 

10:30 – 11:00 AM                  Tea Break

 

 

 

 

11:00 – 1:00 PM                  Session 2.2A             Session Chr : Prof. B. Farouk

                                                                        6 papers = 6 x 15min

 

Paper Number

Time

Title and Author

ICME03-TH-11

11:00

Study of Natural Convection Heat Transfer In A Rectangular Enclosure From One Cooled Side Wall

Mostofa M.M., Sarkar, M.A.R, Huq A.M.A, Islam, M.A

ICME03-TH-12

11:15

Performance Of A Small Locally Made Moist Air

Silica Gel Dehumidifier

Prof. Dr. A.K.M. Iqbal Hussain

ICME03-TH-13

11:30

Analysis of Temperature Distribution, Distortion and Residual Stress Field Developed During the Butt Welding Process by Finite Element Method.      

D. C. Patel, C.K.Desai

ICME03-TH-14

11:45

Parametric Sensitivity Of Down Draft Gasifier As Predicted By Three Zone KF Model    

Mr. J.K.Ratnadhariya, Dr. S.A.Channiwala

ICME03-TH-15

12:00

Design and Development of Downdraft Venturi Type Gasfier

 Vikam P. Rathod, Jayeshkumar K. Ratnadhariya, Dr. S. A. Channiwala

ICME03-TH-17

12:15

Product Distribution from Woody Biomass in a Bench-scale Pyrolyzer

Jigisha Parikh, Dr. S. A. Channiwala, Dr. G. K. Ghosal

 

 

11:00 – 1:00 PM                  Session 2.2B             Session Chr : Prof. Amkee Kim

                                                                        7 papers = 7 x 15min

 

Paper Number

Time

Title and Author

ICME03-AM-12

11:00

Characteristic Evaluation of Mechanical Properties of Plasma Sprayed Ceramic Coating

J.Shivakumar, K.Sadashivappa, Y.Vrushabhendrappa

ICME03-AM-17

11:15

Surface Corrosion Of Mild Steel Structures      

M.T. Islam, M.A. Chowdhury

ICME03-AM-18

11:30

Effect of oxidation and porcelain firing temperatures on tensile bond strength of porcelain to Ni-Cr-Mo base metal surfaces in dentistry

L. Sharana Prabhu, Dr. B.T.Achyutha, S. Manjappa

ICME03-AM-19

11:45

Effect of Perfluoropolyether (PFPE) Fluids on Life of Ball Bearings          

Md. Ziaur Rahman, Nobuyoshi Ohno, Hiroshi Komiya

ICME03-AM-20

12:00

The Influence Of Barrier Layer On Texture And Morphology Of Cu Film On Silicon Wafer Substrates

S. Mridha

ICME03-AM-21

12:15

Application Of Design Of Experiments For Predicting Thin Film Deposition In Electroless Nickel Plating

B. Oraon, G. Majumdar,B. Ghosh

ICME03-AM-22

12:30

Rearrangements Of Hybridized Bonds In Nitrogen Incorporated Camphoric Carbon Thin Films Deposited By Pulsed Laser Ablation

Sharif Mohammad Mominuzzaman, Mohamad Rusop, Tetsuo Soga, Takashi Jimbo, M. Umeno

 

11:00 – 1:00 PM                  Session 2.2C             Session Chr : Eng. A. Bashar

                                                                        7 papers = 7 x 15min

 

Paper Number

Time

Title and Author

ICME03-AM-23

11:00

Development of a Software for Automated Design of Machining Fixtures Using Kinematic Analysis and Synthesis         

P.J.Pawar, S.R.Gangurde

ICME03-AM-24

11:15

Development of an Automatic Forging Die Design System for Two Dimensional Components

P.J.Pawar, S.R.Gangurde

ICME03-AM-25

11:30

Mechanics Of Hydroforming of Sheets And Tubular Components

S.John Alexis, Ruthupavan, Dr.G.Chandramohan

ICME03-AM-26

11:45

Modelling And Analysis of Orthogonal Cutting of Steel Using FEM

M.Pradeep Kumar, B.Mohan ,A.Rajadura, B.R.Dinakar

ICME03-AM-27

12:00

On the machining of Glass Fiber Reinforced composite Pipes

K.Palanikumar, L.Karunamoorthy, C.Vinoth, S.Veeinthra Muthu

ICME03-AM-28

12:15

Application of Solid Lubricants In Grinding: An Investigation On Graphite Molded Grinding Wheels

Dr. Shaji. S, V. Radhakrishnan

ICME03-AM-29

12:30

Calibration Of A Mechanistic Ball-End Milling Force Model From Noisy Cutting Force Data

Abdullahil Azeem, Hsi-Yung (Steve) Feng

 

 

1:00  - 2:00 PM                  Lunch-Break

 

 

2:00 – 3:15 PM                  Session 2.3A             Session Chr : Prof. M. Monde

                                                                        5 papers = 5 x 15min

 

Paper Number

Time

Title and Author

ICME03-TH-10

2:00

Transient Behaviour Of Working Refrigerants

M. Naghashzadegan, M. Nikian

ICME03-TH-19

2:15

Comparative Sudy On Forced Convection Heat Transfer In Developed Region Through A Square Duct With Bottom Ribbed And Non-Ribbed Surface

Khan Rezaul Karim, Md. Morad  Hossain  Mollah, M. A.T Ali, M A R Akhanda  and  Md. A. R  Sarkar

ICME03-TH-20

2:30

Performance Of A Gravity Assisted Heat Pipe

Md. Anwarul Hasan, Chowdhury MD Feroz, A.K.M. Sadrul Islam

ICME03-TH-21

2:45

Optimum Blockage Ratio For Stacks: Steady, Conjugate Problem

Shohel Mahmud, Roydon Andrew Fraser

ICME03-TH-22

3:00

A Single Plate Thermoacoustic System: Viscous Conjugate Problem

Shohel Mahmud, Roydon Andrew Fraser

 

 

2:00 – 3:15 PM                  Session 2.3B          Session Chr : Prof. A.F.M.A. Haque

                                                                        5 papers = 5 x 15min

 

Paper Number

Time

Title and Author

ICME03-AM-30

2:00

A Comparative Study of Benchmarking Practices and Organisational Performance of Malaysian Companies With and Without ISO 9000 Certification

Baba Mohd Deros, Sha’ri Mohd Yusof ,Azhari Md Salleh

ICME03-AM-31

2:15

Concurrent Engineering Approach For Modeling To The Logistics          

J.S.Gnanasekaran, J.S Rathishkumar,   Dr.S.Shanmugasundharam

ICME03-AM-32

2:30

Development of TPM Implementation Plan in Switchgear & Engineering Company

Sim Hock Kheng, Sha’ri Mohd Yusof

ICME03-AM-33

2:45

Integrated Control Chart System with Optimum Sample Size and Sampling Intervals

M. Shamsuzzaman, Zhang Wu

ICME03-AM-34

3:00

Simulation Experimenter: An Expert Support System To Simulation Experiment Design And Analysis

A.H.M Shamsuzzoha, Dr. Nadia Bhuiyan

 

 

2:00 – 3:15 PM                  Session 2.3C             Session Chair : Prof. M. Q. Islam

                                                                        5 papers = 5 x 15min

 

Paper Number

Time

Title and Author

ICME03-FL-06

2:00

An Experimental study of wing passage flows of a Micro Wind Turbine System

M. Zakir Hossain, Hiroyuki Hirahara, M. Mahbubul Alam, Masaaki Kawahashi, Yoshitami Nonomura

ICME03-FL-07

2:15

Dynamic Modeling, Simulation and Control of a Small Wind Energy Conversion System

M. J. Khan, M. T. Iqbal

ICME03-FL-08

2:30

A Study of the A-Pillar Vortex of a Passenger Car Firoz Alam, Gary Zimmer,Simon Watkins

ICME03-FL-09

2:45

Aerodynamics of a Rugby Ball and an Australian Football

Firoz Alam, Watkins, Aleksandar Subic

ICME03-FL-10

3:00

Development Of Flapping Mechanism For Micro-Air Vehicle (MAV)

Dr. V. Baskar, A. Muniappan

 

 

3:15 – 3:30 PM                  Tea-Break

 

 

3:30 – 4:45 PM                  Session 2.4A             Session Chair : Prof. M. I. Hossain

                                                                        5 papers = 5 x 15min

 

Paper Number

Time

Title and Author

ICME03-TH-23

3:30

Diesel Vehicles Emission Control in Bangladesh

A. B. M Siddiqur Rahman Khan

ICME03-TH-24

3:45

Simulation Model for Fuel Injection System of a Diesel Engine

M.Udayakumar, D. Vincent, H. Wilson

ICME03-TH-25

4:00

Fuel Formulation for Low Emissions in DICI Engines

Montajir M. Rahman, Terunao Kawai, Hisakazu Suzuki, Hajime Ishii, Yuichi Goto and Matsuo Odaka

ICME03-TH-18

4:15

Optimization Of Rocket Based Combined

Cycle (Rbcc) Engine

Nayem Jahingir , Ziaul Huque, Shaheen I Alam

ICME03-TH-27

4:30

Controlling Emissions from Conventional Road Transports : Dhaka Situation         

Dr. Md. Ehsan, Dr. Maglub Al Nur

 

 

3:30 – 4:45 PM                  Session 2.4B             Session Chr : Prof. H. Mahfuz

                                                                        5 papers = 5 x 15min

 

Paper Number

Time

Title and Author

ICME03-AM-35

3:30

Fabrication of miniature components using microturning

M.A.Rahman, M.Rahman, A.Senthil Kumar, H.S.Lim, A.B.M.A.Asad

ICME03-AM-36

3:45

A Comparative Study on Various Inserts during Machining of Al/10 vol% and 2D vol% SiC-MMC

A. Manna, B.Bhattacharayya

ICME03-AM-37

4:00

Non-Destructive Inspection Of Aboveground Product Pipelines Of Some Manufacturing Industries In PNG

Lave Michael, John Pumwa, M. A. Satter

ICME03-AM-38

4:15

Modelling And Optimization Of Wheel Dressing Effect Of Machining Performance In Cylindrical Grinding Using Nueral Network          

M. Sivashanmugam, R. Sivaramakrishnan, S. Ramesh,

N. Ramnath, S.N.S. Maaris

ICME03-AM-39

4:30

Analysis and Design of the Travelling Wire electrochemical discharge Machining System for Machining Non-conducting Engineering Materials

N.S.Mitra, Dr. B.Doloi, Dr. B. Bhattacharyya

 

 

3:30 – 4:45 PM                  Session 2.4C             Session Chr : Prof. N. K. Talukder

                                                                        5 papers = 5 x 15min

 

Paper Number

Time

Title and Author

ICME03-AM-40

3:30

Compressive Mechanical Properties Of Closed Cell Al-Si-Cu-Mg Alloy Foams

Amkee Kim, Md Anwarul Hasan, Seung Hoon Nahm, Young Du Jun

ICME03-AM-41

3:45

Effect of Nonhomogeneity on the Stress Intensity Factor for Edge Cracks in an FGM Cylinder

A. M. Afsar, M. Anisuzzaman, M. A. Motaleb

ICME03-AM-42

4:00

Reconstruction of Crack Tip Profile of Small Fatigue Cracks by Ultrasonics  

Dr. M. A. Salam Akanda, M. Saka

ICME03-AM-43b

4:15

Instantaneous Kinematics Using Dual Number Algebra-I: Theory and Application to Serial Manipulators

Sandipan Bandyopadhyay, Ashitava Ghosal

ICME03-AM-43

4:30

Instantaneous Kinematics Using Dual Number Algebra-II: Application to Hybrid, Parallel Manipulators and Singularities

Sandipan Bandyopadhyay, Ashitava Ghosal

 

 

6:00 – 7:00 PM                  Cultural Event

 

    7:00 PM                               Conference Dinner: By Vice-Chancellor, BUET

 

____________________________________________________________________

 

28 Dec 2003, Sunday

 

Session 3.1                        Session Chr : Prof. M.A. Hossain

 

9:00 –   9:45 AM                  Keynote Paper : ICME-03-KEY-06            (A -Council Bld)

 

Acoustically Excited and Thermoacoustically Induced Flows and Heat Transfer

Prof. Bakhtier Farouk and Murat Aktas

9:45 – 10:30 AM                  Keynote Paper : ICME-03-KEY-02            (A - Council Bld)

 

                        Dynamic Response of Sandwich Composites

Prof. Hassan Mahfuz, Tonnia Thomas,

Vijay Rangari,Mohammad S. Islam, Shaik Jeelani

 

10:30 – 11:00                           Tea Break

 

 

11:00 – 12:30 PM                  Session 3.2A             Session Chr : Prof. D. K. Das

                                                                        5 papers = 5 x 15 min

 

Paper Number

Time

Title and Author

ICME03-FL-11

11:00

Unified Design and Comparative Performance Evaluation Of Forward and Backward Curved Radial Tipped Centrifugal Fan

Kinnari Shah, Prof. N. N. Vibhakar , Dr. S. A. Channiwala

ICME03-FL-12

11:15

Experimental and Analytical Investigations of Slip Factor In Radial Tipped Centrifugal Fan

Deepak M. Sharma, N.N.Vibhakar , Dr. S.A.Channiwala

ICME03-FL-13

11:30

Experimental Study of Over expanded Axi-symmetric Jet Impinging on Flat Plate

G. Pundarika, R. Lakshminarayana, A.Mukharjee, A.Bhanot, T.S.Sheshadri

ICME03-FL-14

11:45

Noise Reduction of a Supersonic Jet by Removing the Shock Structure with a Forward Slanted Perforated Tube

M. T. I. Khan, K. Seto, Z. Xu ,M. M. Alam

ICME03-FL-15

12:00

Effect of Non-equilibrium Condensation on Compressible Flows in an Expansion Tube with Orifices

Shigeru Matsuo, Masanori Tanaka, Mamun Mohammad, Toshiaki Setoguchi, Heuy-Dong Kim

 

 

 

 

 

 

 

 

11:00 – 12:30 PM                  Session 3.2B             Session Chr : Prof. G. M. Khalil

                                                                        6 papers = 6 x 15 min

 

Paper Number

Time

Title and Author

ICME03-AM-45

11:00

Study of Machining Characteristics of Silicon Nitrides during CNC Pulsed Nd: YAGE Laser Machining

Dr. B. Doloi, Sri A.S.Kuar,Sk.Akbar Mastan Vali,                   Dr.B.Bhattacharyya

ICME03-AM-46

11:15

Application of Ergonomics In Ship Design

Omar bin Yaakob, Lim Shiau Nee

ICME03-AM-47

11:30

Some Studies On The Drilling Of Gfrp Composite Materials With Hss Tool          

D. G. Thakur, P. K. Brahmankar, M Sadaiah, Patel Sujan

ICME03-AM-48

11:45

Small Angle Neutron Scattering Study of Gemini Surfaces

I. Kamal, F.U. Ahmed, P.S. Goyal, G.U. Ahmad

ICME03-AM-49

12:00

Fabrication and characterization of in-situ reacted Al-5TiC metal matrix composites

Ram Naresh Rai, G. L Datta, M. Chakraborty 

ICME03-AM-53

12:15

Design Of Working Chair And Table For Bangladeshi Garments Workers To Reduce Fatigue And Discomfort           

M. M Kabir, M. Ahmed

 

 

11:00 – 12:30 PM                  Session 3.2C             Session Chr : Prof. S. H. Salter

                                                                                     5 papers = 5  x 15 min

 

Paper Number

Time

Title and Author

ICME03-TH-28

11:00

Energy Audit in Cement Industry          

T.Ashokkumar, P.Raja, Rahmath Ulla Baig

ICME03-TH-29

11:15

Towards Improving Electricity Generation in Nigeria: A Computational Approach

Kofoworola, O. F.

ICME03-TH-30

11:30

Experimental Investigation of Nature of Formation Damage Around Perforations in Petroleum Wells

M. A. Rahman, M. R. Islam

ICME03-TH-26

12:00

Application Of Neural Network Model For Optimizing Thermal Storage Load In Humid Tropics          

Ahmadul Ameen, Khizir Mahmud

ICME03-TH-07

12:30

Emission characteristics of In-Use CNG vehicles in Dhaka           

N. R. Dhar, Aminur Rahman

 

1:00  - 2:00 PM                  Lunch-Break

 

 

2:00 – 3:30 PM                  Session 3.3B             Session Chr : Eng. Z. I. Khan

                                                                                     5 papers = 5  x 15 min

 

Paper Number

Time

Title and Author

ICME03-AM-51

2:00

Automation of Farm-Tractor for Slope Terrains

M.A. Ashraf, R. Torisu, J. Takeda

ICME03-AM-52

2:15

Production Optimization Yields New Insights on Fenchuganj Gas Field  

Md. Bashirul Haq, Edmond Gomes, Mohammad Tamim

ICME03-AM-50

2:30

Non-Proportional Bending And Torsional Loading Of Solid Square Bar Within The Elastic-Plastic Region

S.C. Chowdhury, A. R. Md. Ali

ICME03-AM-44

2:45

The Synthesis Of A Mechanism For Drawing Special Curves Of Type Folium

Ludmila Sass, Alina Duta, Ivona Georgescu1

ICME03-AM-54

3:00

Large Deflection Analysis of the Superelastic Shape Memory Alloy Beams

M. Ashiqur Rahman, Sharifur Rahman, K. N. Ahsan Noman, Sumaiya Islam

 

 

2:00 – 3:15 PM                  Session 3.3C             Session Chr : Eng. Z. Kabir

                                                                                     5 papers = 5  x 15 min

 

Paper Number

Time

Title and Author

ICME03-FL-16

2:00

Modeling of Forest Dynamics of the Sunderbans

B K Bala, M. A. Matin, M. Anowar Hossain

ICME03-FL-17

2:15

Growth of Thermodynamic Boundary Layer through

Porous Media

H. N. Mondal

ICME03-FL-18

2:30

A Study On The Physics Of Supersonic Mixing

Field With Injection At Different Angles

Mohammad Ali, Shakil Ahmed

ICME03-FL-19

2:45

Effect of Air Stream Mach on Mixing Field in a Supersonic Combustor

Rafiqul Hoque, Mohammad Ali

ICME03-FL-20

3:00

Computational Fluid Dynamics And Finite Element Analysis Of A Lawn Mower Mulching Blade Optimization

Md Shamim Reza, Jianhui Xie and R. S. Amano, Paul A. Hagen

 

 

3:30 – 4:00 PM                  Tea-Break

 

4:00 – 5:00 PM                  Concluding Session

 

           2:15 PM                  Dhaka Sight-seeing Tour                 (Optional)

 

 

Please Note the Venue for Different Events :

 

Inagural Ceremony: Central Auditorium, BUET

 

Venue – A: Council Building, BUET

 

Venue – B: Post Graduate Lecture Room, Dept. of ME, EME Building, BUET

 

Venue – C: Library Room, Dept. of ME, EME Building, BUET

 

Concluding Session: Venue – A: Council Building, BUET

 

Dinners: Central Cafeteria Hall, BUET