Dr. Md. Quamrul Islam

E-mail: quamrul@me.buet.ac.bd

Phone: 01760494714

Fax: 880-2-8613046

Dr. Md. Quamrul Islam

Professor, Department of Mechanical Engineering

Education

Ph.D. (VUB,Belgium), M.Sc. Engg (BUET), B.Sc. Engg (BUET).

Research Fields

Renewable Energy
Fluid Mechanics
Hydraulic Machines

Courses Offered

Fluid Mechanics-I,
Fluid Mechanics-II,
Petroleum Engineering.

Other Activities

Directorate of Advisory, Extension and Research Services (DAERS), BUET

Contact Address

Dept. of Mechanical Engineering
Bangladesh University of Engineering & Technology (BUET)
Dhaka 1000, Bangladesh.
 
Phone: 01760494714

880-2-9665650 ext: 7205
Fax:  880-2-8613046
Email:

List of Publications

Books
  1. Islam, M. Q., “Terminology of Engineering”, ISBN 984-07-5956-6. Published by Bangla Academy, Dhaka, Bangladesh, February, 2020
  2. Mandal, A. C and Islam, M. Q., “Mechanics of Solids”, ISBN 984-07-577-8 Published by Bangla Academy, Dhaka, Bangladesh, June, 2018
  3. Islam, M. Q. and Mandal, A. C., “Modern Hydraulic Machines”, ISBN 984-07-5068-2, Published by Bangla Academy, Dhaka, Bangladesh, June, 2013
  4. Mandal, A. C and Islam, M. Q., “Mechanics of Materials with Solved Problems”, ISBN 978-984-33-2260-1, Published by Islamic University of Technology (IUT), The Organization of the Islamic Conference (OIC), Board Bazar, Gazipur, Bangladesh, June, 2011
  5. Mandal, A. C, Islam, M. Q., Saha, S. and Rashid, M. A. R., “Heat Transfer Laboratory Practice”, ISBN 987-984-33-0266-3, Published by Bangladesh University of Engineering & Technology, Dhaka, Bangladesh, June 2010
  6. Islam, M. Q. and Mandal, A. C., “Modern Fluid Mechanics”, ISBN-984-07-4795-9, Bangla Academy, Dhaka, June 2009
  7. Mandal, A. C. and Islam, M. Q., “Drawings for Mechanical Engineers”, ISBN-984-07-4685-5, Published by Bangla Academy, Dhaka, June 2008
  8. Mandal, A. C. and Islam, M. Q., “Mechanical Engineering Drawing”, ISBN 984-8725-008, Published by Bangladesh University of Engineering & Technology, Dhaka, Bangladesh, March, 2007
  9. Islam, M. Q. and Mandal, A. C., “Fluid Mechanics Through Worked Out Problems”, ISBN 984-32-1638-5, Published by Islamic University of Technology (IUT), The Organization of the Islamic Conference (OIC), Board Bazar, Gazipur, Bangladesh, June, 2006
  10. Mandal, A. C. and Islam, M. Q., “Aerodynamics and Design of Wind Turbines”, ISBN 984-31-0923-0, Published by Bangladesh University of Engineering & Technology, Dhaka, Bangladesh, September, 2001
  11. Mandal, A. C. and Islam, M. Q., “Mechanics of Materials Laboratory Practice”, ISBN 984-31-0291-6, Published by Bangladesh University of Engineering & Technology, Dhaka, Bangladesh, March 1999
  12. Islam, M. Q., “Hydraulic Machines Through Worked Out Problems”, ISBN 984-31-0216-4, Published by Bangladesh University of Engineering & Technology, Dhaka, Bangladesh, November 1998
  13. Islam, M. Q., “Hydraulic Machines”, ISBN 984-07-3279-X, Published by Bangla Academy, Dhaka, Bangladesh, June 1995
  14. Akhanda, M. A. R. and Islam, M. Q., “Introduction to Petroleum Geology and Drilling”, ISBN 984-518-003-5, Published by Bangladesh University of Engineering & Technology, Dhaka, Bangladesh, July 1994
  15. Islam, M. Q. and Islam, A. K. M. S., “Fluid Mechanics Laboratory Practice”, ISBN 984-518-000-0, Published by Bangladesh University of Engineering & Technology, Dhaka, Bangladesh, July 1993
  16. Islam, M. Q. and Islam, O., “Fluid Mechanics”, Published by Bangla Academy, Dhaka, Bangladesh, June 1989
Journals
  1. Khan, N. A. and Islam, M. Q., “Study on the Effects of Winglets: Wind Turbine Blade Having Circular Arc Blade Section”. International Journal of Energy and Environmental Engineering, Springer, 12. 837-853 August, 2021, USA
  2. Zawad, A., Islam, M. Q., Rizia, M. and Enam, H. M. K., “A Review on the Study of Wind Loads on Multiple Cylinders with Effects of Turbulence and Surface Roughness”, American Journal of Mechanical Engineering, Vol. 5, No. 3, 2017. pp. 87-90
  3. Hossain, K. M., Islam, S. M. N. and Islam, M. Q., “Study of Performance of an Air Conditioning System and Cooling Load Calculation by Using Developed Software for a Building”, Sonargaon University Journal, Vol. 2, No. 1, June 2017, pp. 135-151
  4. Anwar, P., Islam, M. Q. and Ali, M., “An Experimental Investigation of Flow Over Tall Towers of Square and Pentagonal Shapes in Staggered Form”, Journal of Mechanical Engineering, Vol. ME 45, No. 1, June 2015, Transaction of the Mechanical, Engineering Division, The Institution of Engineers, Bangladesh. pp. 61 - 66
  5. Ferdous, Z., Islam, M. Q. and Ali, M., “A Comparative Analysis of Aerodynamic Characteristics of a Vertical Axis Vane Type Wind Turbine Over Even and Odd Number of Blades”, Journal of Mechanical Engineering, Vol. ME 45, No. 1, June 2015, Transaction of the Mechanical, Engineering Division, The Institution of Engineers, Bangladesh. pp. 14 - 18
  6. Rahman, R., Hossain, B., Saha, S. and Islam, M. Q., “Energy Consunption Pattern in Rural Areas of Bangladesh and its Future Development”, International Journal of  Wind and Renewable Energy , Volume 3, Issue 2, 2014, ISSN: 2277-3975, India. pp. 20-25
  7. Ghosh, K., Islam, M. Q. and Ali, M., “An Experimental Investigation of Flow Over Pentagonal Cylinder”, Journal of Mechanical Engineering, Vol. ME 44, No. 1, June  2014, Transaction of the Mechanical, Engineering Division, The Institution of Engineers, Bangladesh. pp. 57-63
  8. Afroz, Z., Islam, M. Q. and Ali, M., “Investigation of Dynamic Characteristics of Multi-Bladed S-Shaped Vane Type Rotor”, Journal of Mechanical Engineering,  Vol. ME 44, No. 1, June 2014, Transaction of the Mechanical, Engineering Division, The Institution of Engineers, Bangladesh. pp. 73 - 79
  9. Hossain, M. J., Islam, M. Q. and Ali, M., “An Experimental Investigation of Wind Effects and Dynamic Behavior of an Octagonal Cylinder”, International Journal of Material and Mechanical Engineering (IJMME) Volume 2, Issue 3, Malaysia,August 2013. . pp 57 - 63
  10. Hossain, J, M., Islam, M. Q.and Ali, M., “Lift and Drag on Cylinder of Octoganal Cross Section in a Turbulent Stream”, Journal of Energy, Heat and Mass Transfer, Vol. 35, India, 2013. pp 239-252
  11. Hossain, M. J., Islam, M. Q. and Ali, M., “An Experimental Investigation of Wind Load on Tall Buildings with Octagonal Cross-Section”, International Journal of Renewable Energy Research, Volume 3, No. 1, 2013. pp. 192-200
  12. Hossain, M. J., Islam, M. Q. and Ali, M., “An Experimental Investigation of Wind Load on Tall Buildings with Octagonal Cross-Section”, International Journal of Renewable Energy Research, Volume 3, No. 1, 2013. pp. 192-200
  13. Hossain, M. J., Islam, M. Q. and Ali, M., “An Experimental Investigation of Flow  Over Octagonal Cylinders With Rounded Corners”, Journal of Mechanical  Engineering, Vol. ME 43, No. 1, June 2013, Transaction of the Mechanical,  Engineering Division, The Institution of Engineers, Bangladesh. pp. 1-14
  14. Shahed, S. S., Ali, M. and Islam, M. Q., “Numerical Analysis of Hemodynamic  Forces Through Stenotic Artery”, Journal of Mechanical Engineering, Vol. ME 43, No. 1, June 2013, Transaction of the Mechanical, Engineering Division, The Institution of Engineers, Bangladesh. pp. 41-47
  15. Shahed, S. S., Ali, M. and Islam, M. Q., “Numerical Analysis of Hemodynamic  Forces Through Stenotic Artery”, Journal of Mechanical Engineering, Vol. ME 43, No. 1, June 2013, Transaction of the Mechanical, Engineering Division, The Institution of Engineers, Bangladesh. pp. 41-47
  16. Adhikari, A., Islam, M. Q. and Ali, M., “Performance of a Stationary Savonius Rotor with Circular Arc Blade Profile”, Journal of Mechanical Engineering, Vol. ME 43, No. 2, December 2013, Transaction of the Mechanical, Engineering Division, The Institution of Engineers, Bangladesh. pp. 77-81
  17. Shahidul, I. K., Sarkar, M. Z. R. and Islam, M. Q., “Design and Analysis of a Low Cost Solar Water Pump for Irrigation in Bangladesh”, Journal of Mechanical Engineering, Vol. ME 43, No. 2, December 2013, Transaction of the Mechanical, Engineering Division, The Institution of Engineers, Bangladesh. pp. 98-102
  18. Alam, G. M. J., Mamun, M., Ali, M. A., Islam, M. Q. and Islam, A. K. M. S., “Fabrication of Half Wing Aerofoil Shaped Fuselage UAV Model and Investigation of it’s Point Surface Pressure on Wing Surfaces”, MIST Journal of Science and Technology, Volume 2, Number 2, December 2013, Dhaka-1216, Bangladesh. pp. 18-25
  19. Nahar, S., Islam., M. Q. and Ali, M., “ Design Fabrication and Performance Test of a Six Bladed Savonius Rotor”, International Journal of Advanced Renewable Energy Research, Vol. 1, Issue 1, pp 1-7, March 2012, Canada
  20. Bagum, N., Rashed, A. A., Masud, A. K. M. and Islam, M. Q., “Using Multicriteria Analysis in Decision Making Regarding the Adoption of Wind Pump for Irrigation in Bangladesh”, Journal of General Management, Volume 15, Issue 1, Year 2012, pp 157-178, Romania
  21. Ali, M., Umemura, A. and Islam, M. Q., “A Numerical Investigation on Dynamicsand Breakup of Liquid Sheet”, Journal of Fluids Engineering, Transactions of the ASME, October 2012, Vol. 134. pp 1 to 7
  22. Hossain, M. J., Islam, M. Q. and Ali, M., “An Experimental Investigation of Wind Load on a Group of Octagonal Cylinders with Variable Longitudinal Spacing”, Journal of Engineering and Technology, Islamic University of Technology (IUT),  Vol. 10, No. 1, June 2012. pp. 01-21
  23. Nahar, S., Islam, M. Q. and Ali, M., “Theoretical Investigation of Torque and Drag Characteristics of a Six Bladed Savonius Rotor”, Journal of Engineering and Technology, Islamic University of Technology (IUT), Vol. 10, No. 1, June 2012. pp. 01-21
  24. Ali, M., Islam, M. Q. and Khadem, M., “Physics of Breakup in Liquid Column and Sheet”, The Journal of Engineering Research, Vol. 8, No. 2, 2011, Oman, pp 59-65
  25. Afroz, Z., Islam, M. Q. and Ali, M., “Experimental Studies on Multi-Bladed SShaped Vane Type Rotor”, Journal of Engineering and Technology, Islamic University of Technology (IUT), Vol. 9, No. 2, December 2011. pp. 01-20
  26. Saha, G., Saha, S., Hasan M. N. and Islam, M. Q., “Natural Convection Heat Transfer within Octagonal Enclosure”, International Journal of Engineering (Iran), Vol. 23, No. 1, January 2010. pp 1-10
  27. Saha, G., Saha, S. and Islam, M. Q., “Convective Heat Transfer Inside an Enclosure with Double Heaters and Exit Configurations”, International Journal of Applied Mathematics (ISSN No. 0975-7937), Vol. 1, Issue 1, India, April’10-September’10, 2010, pp. 85-90
  28. Bagum, M. N., Masud, A. K. M. and Islam, M. Q., “An Investigation of Wind Power Utilization for Irrigation in Bangladesh”, Journal of Engineering and Technology, Islamic University of Technology (IUT), Vol. 8, No. 1, June, 2010. pp. 1-12
  29. Saha, S., Saha, G., Islam, M. Q. and Raju, M. C., “Mixed Convection Inside a LidDriven Parallelogram Enclosure with Isoflux Heating from Below”, Journal of Future Engineering & Technology, Vol. 6, No. 1, August-October 2010, India, pp. 14-22
  30. Islam, T. M., Saha, S., Ali, M., and Islam, M. Q., “Mixed Convection Heat Transfer Characteristics in a Channel with an Open Cavity”, Journal of Energy, Heat and Mass Transfer, Vol. 31, India, 2009. pp 73-89
  31. Saha, S., Islam, M. Q. and Saha, G., “Mixed Convection in a Vee-corrugated Enclosure with Isoflux Heating from Below”, The AUST Journal of Science and Technology, Volume-1, Issue-1, January 2009, Bangladesh. pp 84-96
  32. Islam, M. Q., Ali, M. and Saha, S., “Low Cost High Solidity Horizontal Axis Wind Turbine for Irrigation in Bangladesh”, Journal of Energy, Heat and Mass Transfer, Vol. 30, India, 2008. pp 183-192
  33. Saha, S., Saha, G. and Islam, M. Q., “Natural Convection in Square Enclosure With Adiabatic Cylinder at Center and Discrete Bottom Heating”, Daffodil International University of Science and Technology, Vol. 3, Issue 1, January 2008. pp. 29-36
  34. Sultana, T., Saha, S., Saha, G. and Islam, M. Q., “Natural Convection in Tilted Square Cavities with Triangular Shaped Top Cold Wall”, Journal of Mechanical Engineering, The Institution of Engineers, Bangladesh, June 2008, Volume: ME 39, No.1. pp. 30-39
  35. Mukut, A. N. M., Islam, M. Q. and Alam, M. M., “Analysis of Wind Characteristics in Coastal Areas of Bangladesh”, Journal of Mechanical Engineering, The Institution of Engineers, Bangladesh, June 2008, Volume: ME 39, No.1. pp. 45-49
  36. Kamal, M. F. and Islam, M. Q., “Aerodynamic Characteristics of a Stationary Five Bladed Vertical Axis Vane Wind Turbine”, Journal of Mechanical Engineering, The Institution of Engineers, Bangladesh, Dec. 2008, Volume: ME 39, No.2. pp. 95-99
  37. Bhuiyan, A. A., Islam, A. K. M., Ali, M. M. and Islam, M. Q., “Wind Resource Assessment at Engineering Staff College Meghnaghat, Bangladesh”, Journal of the Institution of Engineers, Bangladesh, Vol. 33, No. 1 December-2008. pp 91-100
  38. Saha, S., Saha, G. and Islam, M. Q., “Finite Element Analysis of Natural Convection in a Differentially Square Cavity”, Bangladesh Journal of Physics, Vol. 5 & 6 December 2008. pp 47-57
  39. Islam, M. T., Rahman, M., Mamun, M. A. H. and Islam, M. Q., “Numerical Simulation on Mixed Convection in Parallelogrammic Ventilated Enclosure”, Journal of Mathematical Society, Bangladesh, (ISSN 1506-3694) Vol.28 (2008) pp. 45-58
  40. Mustafa, M., Mandal, A. C. and Islam, M. Q., “Simulation of Wind Flow Around a Group of Square Cylinders With Variable Transverse Spacing by k −ε Turbulence Model”, Suranaree Journal of Science Technology, Thailand, Vol. 14, No. 4, October - December 2007, pp 347-356
  41. Saha, G., Islam, M. T., Saha, S. and Islam, M. Q., “Natural Convection in Tilted Isosceles Triangular Enclosure with Discrete Bottom Heating”, Thammasat International Journal of Science and Technology, Thailand, Vol. 12, No. 4, October-December 2007. pp. 24-35
  42. Saha, G., Saha, S. and Islam, M. Q., “Natural Convection in a Modified Square Enclosure With Constant Flux Heating From Left”, The AIUB Journal of Science and Engineering (AJSE), Vol. 6, No. 1, August 2007. pp. 89-96
  43. Saha, G., Saha, S., Islam, M. Q. and Akhanda, M. A. R., “Natural Convection in Enclosure With Isothermal Sidewalls and Constant Flux Heating from Below”, Journal of Naval Architecture and Marine Engineering (JNAME), Vol. 4, No. 1, June 2007. pp. 1-13
  44. Saha, S., Saha, G., Ali M. and Islam, M. Q., “Natural Convection in a VeeCorrugated Square Enclosure With Discrete Heating From Below”, Journal of Engineering and Technology, Islamic University of Technology (IUT), Vol. 6, No. 1, Jan-June, 2007. pp. 15-27
  45. Hossain, M. K. M., Islam, M. Q., Mandal A. C. and Saha, S., “Wind Effect on Staggered Cylinders of Square and Rectangular Sections with Variable Longitudinal Spacing”, Journal of Mechanical Engineering, The Institution of Engineers, Bangladesh, Dec. 2007, Vol. ME 38. pp. 52-57
  46. Saha, S., Saha, G., Ali M. and Islam, M. Q., “Combined Free and Forced Convection Inside a Two-Dimensional Multiple Ventilated Rectangular Enclosure”, Journal of Engineering and Applied Sciences, Pakistan, Vol.1, No. 3, October 2006, pp 23-35.
  47. Ali, M., Islam, M. S., Islam, M. Q. and Morshed, A. K. M., “Flow Characteristics of Two Non-Parallel Streams Behind a Finite Thickness Base”, Journal of Mechanical Engineering, The Institution of Engineers, Bangladesh, June 2006, Vol. ME 35. pp 23-34
  48. Saha, S., Islam, T. M., Ali, M., Mamun, M. A. H. and Islam, M. Q., “Effect of Inlet and Outlet Locations on Transverse Mixed Convection Inside a Vented Enclosure”, Journal of Mechanical Engineering, The Institution of Engineers, Bangladesh, Dec. 2006, Vol. ME 36. pp 27-37
  49. Saha, S., Sultana, T., Saha, G. and Islam, M. Q., “Natural Convection Inside a Vee Corrugated Enclosure: Effect of Inclination Angle and Discrete Heat Source Size”, Journal of the Institution of Engineers, Bangladesh, Vol. Mul-dis 31, No. 1 December-2006. pp 85-99
  50. Islam, M. Q., Hasan, M. S. and Chowdhury, F. H., “Aerodynamic Characteristics of Two-, Three- and Four-Bladed Stationary Savonius Rotors”, Journal of Engineering and Technology, Islamic University of Technology (IUT), Vol. 4, No. 1, Jan-June, 2005. pp 01-11
  51.  Hasan, M. S., Akhanda, M. A. R., Islam, M. Q. and Ali, M., “Air Pollution in Dhaka City after Withdrawal of Two Stroke Engine Vehicles”, Journal of Mechanical Engineering, The Institution of Engineers, Bangladesh. June & Dec. 2005, Vol. ME 34. pp 60-73
  52. Ahmed, S. and Islam, M. Q., “The Aerodynamic Performance of the Water Pumping Wind Turbine for Bangladesh”, Mehran University Research Journal of Engineering and Technology, Vol. 23, No. 1, January 2004, Pakistan. pp. 51-60
  53. Kader, M. F., Ilahi, M. F. and Islam, M. Q., “Aerodynamic Forces Around a Tapered Square Cylinder”, Journal of Engineering and Technology, Islamic University of Technology (IUT), Vol. 3, No. 1, January-June, 2004. pp 31-39
  54. Bachhar, S., Islam, M. Q. and Mandal, A. C., “An Experimental Investigation of Head Loss Through Locally Made Strainers for Hand Tube-Wells of Bangladesh”, Journal of Engineering and Technology, Islamic University of Technology (IUT). Vol. 4, No. 2, July - December, 2004. pp 31-37
  55. Akhanda, M. A. R., Islam, M. Q. and Chowdhury, F. H., “Air Pollution Measurement in Dhaka City”, Mehran University Research Journal of Engineering and Technology, Vol. 22, No. 4, October 2003, Pakistan. pp. 225-232
  56. Islam, M. Q. and Mandal, A. C., “The Performance of the High Solidity Multi Blade Horizontal Axis Wind Turbine Calculated by Cascade Theory”, Journal of Mechanical Engineering, The Institution of Engineers, Bangladesh, Vol. ME 30, June 2002. pp. 33-44
  57. Ahmed, S. and Islam, M. Q., “Extraction of Wind Power by Horizontal Axis Wind Turbine for Water Pumping in Bangladesh”, Journal of Mechanical Engineering, 
    The Institution of Engineers, Bangladesh, Vol. ME 31, December 2002. pp. 112-122
  58. Mamun, N. H. A., Islam, M. Q. and Islam, A. K. M., “Bicycle Driven Low Cost Patient Carrier for Rural Areas of Bangladesh”, Journal of Asiatic Society of Bangladesh (Science), Vol. 27, No. 1, June 2001. pp. 9-16
  59. Islam, M. Q., “A Theoretical Investigation of Aerodynamic and Structural Design of Horizontal Axis Wind Turbine”, Mehran University Research Journal of Engineering and Technology, Vol. 19, No. 3, July 2000, Pakistan. pp. 141-158
  60. Islam, M. Q and Islam, A. K. M. S., “Assessment of Wind Power”, Journal of Institute of Engineers, Malaysia, No.1, January 2000. pp. 45 – 48
  61. Al-Nur, M. and Islam, M. Q., “The Bangladesh Car: Energy and Environment”, Journal of Institution of Engineers, India, Vol. 79, August 1998. pp. 15-17
  62. Islam, M. Q., Islam, A. K. M. S., Islam, S. M. N. and Razzaque, M. M., “Application of Wind Energy for Irrigation in Bangladesh”, Journal of Agricultural Mechanization in Asia, Tokyo, Japan, Vol. 6, No. 2, Spring 1995. pp. 24-28
  63. Islam, A. K. M. S., Chowdhury, A., Naser, J. A. and Islam, M. Q., “Numerical Study of Forced Convection in a Packed Channel with Asymmetric Heating”, Journal of Chemical Engineering Communication, Vol. 138, 1995, U. S. A. pp. 75-87
  64. Islam, A. K. M. S., Islam, M. Q. and Ashraf, R., “Static Torque and Drag Characteristics of an S-Shaped Savonius Rotor and Prediction of Dynamic Characteristics”, Journal of Wind Engineering, U.K, Vol. 19, No. 6, U. K., 1995. pp. 363-370
  65. Kamal, I. and Islam, M. Q., “A Theoretical Investigation of the Design and Performance of a Horizontal Axis Wind Turbine at Various Wind Condition of Bangladesh”, Journal of Mechanical Engineering Research Bulletin, BUET, Dhaka, Vol. 18, December 1995. pp. 33-52
  66. Islam, M. Q. and Islam, A. K. M., S. “Energy from the Wind”, Journal on Environment, Architecture, Research, Technology and Human Settlement, Dhaka, No. 4, September 1995. pp. 108-110
  67. Islam, M. Q. and Islam, A. K. M. S., “The Potential for Wind Energy in Bangladesh”, Journal of Energy, Heat and Mass Transfer, Vol. 16, 1994, India. pp. 229-236
  68. Islam, M. Q. and Mandal, A. C., “A Study of the Design of Horizontal axis Wind Turbine”, Journal of Engineering, Islamic Republic of Iran, Vol. 2&3, August, 1993. pp. 117-124
  69. Islam, A. K. M. S., Islam, M. Q., Mandal, A. C. and Razzaque, M. M., “Aerodynamic Characteristics of a Stationary Savonius Rotor”, RERIC International Energy Journal, Bangkok, Thailand, Vol. 15, No. 2, December 1993. pp. 125-136
  70. Islam, A. K. M. S. and Islam, M. Q., “The Aerodynamic Performance of a Horizontal Axis Wind Turbine Calculated by Strip Theory and Cascade Theory”, JSME International Journal, Vol. 37, No. 4, JSME, Tokyo, Japan, 1993. pp. 271-877
  71. Islam, M. Q., Islam, A. K. M. S. and Mandal, A. C., “The Prospect of Wind Energy Application in Bangladesh”, Journal of Mechanical Engineering Research Bulletin, BUET, Dhaka, Vol. 16, December 1993. pp. 27-40
  72. Islam, M. Q. and Pervin, R., “Wind Energy in Bangladesh”, Bangla Academy Bijnan Patrika, Half Yearly Science Journal, Bangla Academy, 20th Year, Vol. 1, October 1993. pp. 119-136
  73. Islam, M. Q. Haque, A. M. and Das, D. K., “Water Lifting Devices for Irrigation in Bangladesh”, Journal of Agricultural Mechanization in Asia, Tokyo, Japan, Vol. 23, No. 2, 1992. pp. 29-37
  74. Huda, M. D., Islam, M. Q. and Islam, A. K. M. S., “The Performance of an SShaped Savonius Rotor with a Deflecting Plate”, RERIC International Energy Journal, AIT, Bangkok, Thailand, Vol. 14, No. 1, June 1992. pp. 25-32
  75. Islam, M. Q., Islam, A. K. M. S. and Al-Nur, M., “A Study of the Design of a Wind Powered Water Pumping Set Suitable for Bangladesh”, Journal of Agricultural Mechanization in Asia, Tokyo, Japan, Vol. 25, No.4, 1992. pp. 73-74
  76. Salam, A. and Islam, M. Q., “Secondary Flow Investigation Inside the Passage of a Compressor Cascade”, Journal of Institution of Engineers, India, Vol. 72, May 1991. pp. 11-18
  77. Kamal, I. and Islam, M. Q., “A Theoretical Investigation of the Design of Wind Powered Water Pumping Set for Bangladesh”, Journal of Mechanical Engineering Research Bulletin, BUET, Dhaka, Vol. 13, 1990. pp. 7-14
  78. Islam, M. Q. and Mandal, A. C., “Prediction of Natural Frequencies of Horizontal Axis Wind Turbine Blade”, Journal of the Institution of Engineers, Bangladesh, Vol. 17, No. 2, April 1989. pp. 1-6
  79. Mandal, A. C. and Islam, M. Q., “Optimum Design of a Darrieus Wind Turbine at Constant Turbine Speed”, Journal of the Institution of Engineers, Bangladesh, Vol. 17, No, 2 & 3, July-October 1989. pp. 39-45
  80. Mandal, A. C. and Islam, M. Q., “Performance Prediction of a Darrieus Turbine with Cascade Theory Including Blade Pitching”, Journal of Mechanical Engineering Research Bulletin, BUET, Dhaka, Vol. 12, 1989. pp. 1-8
  81. Salam, A. and Islam, M. Q., “Effect of Inlet Blockage on the Pressure Recovery of Conical and Annular Diffuser”, Journal of Institution of Engineers, India, Vol.69, July 1988. pp. 1-5
  82. Islam, M. Q. and Mandal, A. C., “Application of Cascade Theory for the Aerodynamic Performance Analysis of a Horizontal Axis Wind Turbine”, Journal of Institution of Engineers, India, Vol.69, July 1988. pp. 18-21
  83. Mandal, A. C. and Islam, M. Q., “Flow Curvature Effect on Darrieus Wind Turbine With Blade Pitching”, RERIC International Energy Journal, AIT, Bangkok, Thailand, Vol. 10, No. 2, December 1988. pp. 61-73
  84. Islam, M. Q. and Mandal, A. C., “A Theoretical Investigation of the Effects of Tower Shadow on the Horizontal Axis Wind Turbine”, Journal of the Institution of Engineers, Bangladesh, Vol. 16, No. 1, January 1988. pp. 1-6
  85. Mandal, A. C. and Islam, M. Q., “Effect of Blade Supporting Struts on the Performance of a Darrieus Wind Turbine”, Journal of the Institution of Engineers, Bangladesh, Vol. 16, No. 2, April 1988. pp. 9-12
  86. Islam, M. Q. and Mandal, A. C., “Theoretical Structural Analysis of a Horizontal Axis Wind Turbine”, Journal of Mechanical Engineering Research Bulletin, BUET, Dhaka, Vol. 11, 1988. pp. 26-40
  87. Islam, M. Q. and Salam, A., “The Effect of Wind Shear on the Performance of a Horizontal Axis Wind Turbine”, Renewable Energy Review Journal, AIT, Bangkok, Thailand, Vol. 9, No. 2, December 1987. pp. 81-90
  88. Islam, M. Q. and Mandal, A. C., “Effect of Blade Shapes on the Performance of a Horizontal Axis Wind Turbine”, Journal of Mechanical Engineering Research Bulletin, BUET, Dhaka, Vol. 10, 1987. pp. 27-34
  89. Mandal, A. C. and Islam, M. Q., “Optimum Design of a Straight-Bladed Darrieus Wind Turbine at Variable Turbine Speed”, Journal of Mechanical Engineering Research Bulletin, BUET, Dhaka, Vol. 10, 1987. pp. 54-62
  90. Alam, M. M. and Islam, M. Q., “Effect of Yaw on Rotor Stability of Horizontal Axis Wind Turbines”, Journal of Mechanical Engineering Research Bulletin, BUET, Dhaka, Vol. 10, 1987. pp. 1-10
  91. Islam, M. Q. and Islam, O., “Effect of Vane Inclination on the Performance of Radial Vane Centrifugal Pump”, Journal of Agricultural Mechanization in Asia, Tokyo, Japan, Vol. 14, No. 3, Summer 1983. pp. 59-61
  92. Hossain, M. A. and Islam, M. Q., “A Sailwing Rotor for Pumping Water”, Asset, Abstract of Selected Solar Energy Technology, Vol. 5, No. 1, Japan, January 1983. pp. 22-24
  93. Islam, S. M. N. and Islam, M. Q., “Measurement of Mean Velocity in Turbulent Jets Issuing from a Rectangular Nozzle”, Journal of Thermal Engineering, Indian Society of Mechanical Engineers, New Delhi, India, Vol. 2, No. 4, 1982. pp. 111-120
  94. Hossain, M. A. and Islam, M. Q., “Sailwing Rotor for Pumping Water in Bangladesh”, Renewable Energy Journal, AIT, Bangkok, Thailand, Vol. 4, No. 1, June 1982. pp. 29-35
  95. Islam, M. Q., Islam, S. M. N. and Islam, O., “An Experimental Investigation of Performance of Multi-Cylinder Reciprocating Pump”, Journal of Mechanical Engineering Research Bulletin, BUET, Dhaka, Vol. 4, No. 1, 1981. pp. 1-5
  96. Islam, M. Q. and Hossain, A., “Savonius Rotor for Lifting Water in Bangladesh”, Journal of Mechanical Engineering Research Bulletin, BUET, Dhaka, Vol. 4, No. 1, 1981. pp. 19-22
  97. Islam, M. Q. and Islam, S. M. N., “Flow Through a Jet Issuing From a Square Nozzle”, Journal of Indian Society of Mechanical Engineers, New Delhi, India, Vol. 1, No. 4, 1980. pp. 145-152
  98. Islam, M. Q. and Islam, O., “Study of Loss Characteristics of Gate Valves”, Journal of Mechanical Engineering Research Bulletin, BUET, Dhaka, Vol. 3, No. 1, 1980. pp. 11-13
  99. Islam, M. Q. and Khan, M. H., “An Experimental Investigation of Flow Through Flexible Pipes and Bends”, Journal of Institution of Engineers, Dhaka, Bangladesh, Vol. 7, No. 3, July 1979. pp. 7-10
  100. Islam, M. Q., Akhanda, M. A. R. and Islam, O., “An Experimental Investigation of the Performance of Centrifugal Fan with Radial Vane Impellers”, Journal of Mechanical Engineering Research Bulletin, BUET, Dhaka, Vol. 2, No. 1, 1979. pp. 27-29
Conferences
  1. Emtiaz, S. M., Dipto, S. S. and Islam, M. Q., “Study of Minor Loss Coefficient and Minor Head Losses for Sudden and Gradual Change in Pipe Diameter”, Proceedings of the International Conference on Mechanical Engineering and Renewable Energy 2021 (ICMERE) 12-14 December 2021, Chattogram, Bangladesh.
  2. Salam, M. A., Taher, M. A. and Islam, M. Q., “Experimental Analysis of Aerodynamic Performance on Asymmetric NACA 23018 Aerofoil Incorporating a Leading-Edge Rotating Cylinder”, Conference Proceedings of Institute of Physics, U. K. Vol. 912, No. 4, p. 042027 (2020).
  3. Sami, S. S., Ali, M. and Islam, M. Q., “Effects of Swirling on Non-Newtonian Fluid Flow Through Arterial Stenois”, 13th International Conference on Mechanical Engineering, 18-20 December 2019, Dhaka, Bangladesh. Paper ID: 202.
  4. Hasan, M. N., Akhtaruzzaman, R., Ahmed. A., Islam, M. Q. and Saha, S., “Numerical Modeling of Marangoni Convection in Presence of External Magnetic Field”, Proceedings of 8th BSME International Conference on Thermal Engineering, 19-21 December 2018, Dhaka, Bangladesh, Paper No. 257.
  5. Chowdhury, T. and Islam, M. Q., “Analysis of Wind Pressure Coefficients on CTBUH Standard High Rise Buildings in CFD Simulations”, Proceedings of 8th BSME International Conference on Thermal Engineering, 19-21 December 2018, Dhaka, Bangladesh, Paper No. 18.
  6. Ara, I., Ali, M., Islam, M. Q. and Akhter, N., “ An Experimental Investigation on the Aerodynamic Characteristics of NACA4412 with Winglets”, Proceedings of 8th BSME International Conference on Thermal Engineering, 19-21 December 2018, Dhaka, Bangladesh, Paper No. 97.
  7. Saha, S., Khalil, M. I., Anwar, S. and Islam, M. Q., “Aerodynamic Characteristics of Turbulent Flow Over Two Side-by-Side Rotating Cylinders: A Numerical Approach”, book of abstracts of The 3rd Australian Conference on Computational Mechanics, Paper I.D79, 12-14 February, 2018, Deakin University Waurn Ponds Campus, Australia.
  8. Ara, I., Ali, M., Islam, M. Q. and Haque, N., “Performance Study of Winglets on Tapered Wing with Curved Trailing Edge”, Proceedings of 7th BSME International Conference on Thermal Engineering, 22-24 December 2016, Dhaka, Bangladesh,
    Paper ID No. 3.03. Published by the American Institute of Physics, AIP Conference Proceedings 1851, 02005 (2017).
  9. M. I. Ibrahim, S. Anwar, S. Saha and M. Q. Islam, “Numerical Study of Turbulent Flow over Two Side-by-Side Rotating Cylinders”, Proceedings of the 12th International Conference on Mechanical Engineering 2017 (ICME2017) held in 2022 December 2017, Dhaka, Bangladesh. Paper ID No. 279.
  10. T. Chowdhury, M. Q. Islam and M. Ali, “CFD Study of Wind Effect on Staggered Cylinders of Square Cross Section with Variable Longitudinal and Transverse Spacing”, Proceedings of the 12th International Conference on Mechanical Engineering 2017 (ICME2017) held in 20-22 December 2017, Dhaka, Bangladesh. Paper ID No. 44.
  11. M. Rizia, Z. Abedin, T. Chowdhury and M. Q. Islam, “Wind Effect on Cylinders of Octagonal Sections at Different Locations”, Proceedings of the 12th International Conference on Mechanical Engineering 2017 (ICME2017) held in 20-22 December 2017, Dhaka, Bangladesh. Paper ID No. 51.
  12. Islam, M. S., Hakim, S. M., Ali, M. and Islam, M. Q., “Numerical Investigation on Boundary Layer Control Through Moving Surface in NACA 0012 Airfoil”, Proceedings of 7th BSME International Conference on Thermal Engineering, 22-24 December 2016, Dhaka, Bangladesh. Published by the American Institute of Physics, AIP Conference Proceedings 1851, 02017 (2017).
  13. Subedi, S., Barua, S., Hasan, M. A., Saha. S. and Islam, M. Q., “Influence of Interior Angle on Pure Mixed Convection of Lid-Driven Parallelogram Cavity”, Proceedings of 7th BSME International Conference on Thermal Engineering, 22-24
    December 2016, Dhaka, Bangladesh, Paper ID No. 2.21. Published by the American Institute of Physics, AIP Conference Proceedings 1851, 020106 (2017).
  14. Anwar, P., Islam, M. Q. and Ali, M., “An Experimental Study on the Effect of Wind Load Around Tall Towers of Square and Hexagonal Shapes in Staggered Form”, Proceedings of 7th BSME International Conference on Thermal Engineering, 22-24 December 2016, Dhaka, Bangladesh, Paper ID No. 4.08 Published by the American Institute of Physics, AIP Conference Proceedings 1851, 02005 (2017).
  15. Sarker, K., Ali, M. and Islam, M. Q., “Numerical Investigation of Effect of Mach Number Over a Flat Plate with Backward Facing Step”, Proceedings of 6th BSME International Conference on Thermal Engineering, 19-21 December 2014, Dhaka, Bangladesh, Paper ID No. 4.06. Procedia Engineering 105 (2015), Elsevier, pp 302-308.
  16. Ehteshum, M., Ali, M., Islam, M. Q. and Tabassum, M., “Heat Transfer Performance Analysis of Rectangular Fin Arrays with Perforation Shapes and Number”, Proceedings of 6th BSME International Conference on Thermal Engineering, 19-21 December 2014, Dhaka, Bangladesh, Paper ID No. 2.21. Procedia Engineering 105 (2015), Elsevier, pp 184-191.
  17. Ghosh, K., Islam, M. Q. and Ali, M.,”Pressure Distribution and Forces on Hexagonal Cylinders”, Proceedings of 6th BSME International Conference on Thermal Engineering, 19-21 December 2014, Dhaka, Bangladesh, Paper ID No. 14.3 Procedia Engineering 105 (2015), Elsevier, pp 835-843.
  18. Hasan, M. N., Samiuzzaman, K., Haque, S. H., Saha, S. and Islam, M. Q., “Mixed Convection Heat Transfer Inside a Square Cavity Filled with Cu-water Nanofluid”, Proceedings of 6th BSME International Conference on Thermal Engineering, 19-21 December 2014, Dhaka, Bangladesh, Paper ID No. 6.17. Procedia Engineering 105 (2015), Elsevier, pp 438-445.
  19. Shavik, S. M., Hasan, M. N., Morshed, A. K. M. and Islam, M. Q., ” Molecular Dynamics Study of Effect of Different Wetting Conditions on Evaporation and Rapid Boiling of Ultra-thin Argon Layer on Platinum Surface”, Proceedings of 6th BSME International Conference on Thermal Engineering, 19-21 December 2014, Dhaka, Bangladesh, Paper ID No. 6.18 Procedia Engineering 105 (2015), Elsevier, pp 446-457.
  20. Ghosh, K., Saha, A., Islam, M. Q. and Ali, M., “Analysis of Pressure Distribution on Combinations of Cylinders Due to the Effect of Wind Loading”, Proceedings of the 11th International Conference on Mechanical Engineering 2015 (ICME2015) held in 18-20 December 2015, Dhaka, Bangladesh. Paper ID No. 122.
  21. Hassan, S. M., Ali, M. and Islam, M. Q., “The Effect of Solidity on the Performance of H-Rotor Darrieus Turbine”, Proceedings of the 11th International Conference on Mechanical Engineering 2015 (ICME2015) held in 18-20 December 2015, Dhaka, Bangladesh. Paper ID No. 268.
  22. Anwar, P., Islam, M. Q. and Ali, M., “An Experimental Investigation of Wind Flow Over Tall Towers in Staggered Form”, Proceedings of the 11th International Conference on Mechanical Engineering 2015 (ICME2015) held in 18-20 December 2015, Dhaka, Bangladesh. Paper ID No. 396. 
  23. Jaman, M. S., Islam, S., Saha, S., Hasan, M. N. and Islam, M. Q.,”Effect of Reynolds Numbers on Mixed Convection Inside a Lid-Driven Square Cavity Filled with Water- Al2O3 Nanofluid”, Proceedings of the 11th International Conference on
    Mechanical Engineering 2015 (ICME2015) held in 18-20 December 2015, Dhaka, Bangladesh. Paper ID No. 611.
  24. Shavik, S. M., Hasan, M. N., Morshed, A. K. M. and Islam, M. Q., “Natural Convection and Entropy Generation in a Square Inclined Cavity With Differentially Heated Vertical Walls”, Proceedings of the 10th International Conference on Mechanical Engineering 2013 (ICME2013) held in 20-21 June 2014, Dhaka, Bangladesh. Paper ID No. 309. Procedia Engineering 90 (2014), Elsevier, pp 557-562.
  25. Hassan, S. M. R., Islam, T., Ali, M. and Islam, M. Q., “Numerical Study on Aerodynamic Drag Reduction of Racing Cars”, Proceedings of the 10th International Conference on Mechanical Engineering 2013 (ICME2013) held in 20-21 June 2014, Dhaka, Bangladesh. Paper ID No. 217. Procedia Engineering 90 (2014), Elsevier, pp 308-313.
  26. Islam, T., Hossain, S. M. R., Ali, M. and Islam, M. Q. “Finite Volume Study of Flow Separation Phenomena for Steady Flow Over a Circular Cylinder at Low Reynolds Number”, Procedia Engineering 90 (2014), Elsevier, pp 282-287.
  27. Alam, G. M. J., Mamun, M., Ali, M. A., Islam, M. Q. and Islam, A. K. M. S., “Investigation of the Aerodynamic Characteristics of an Aerofoil Shaped Fuselage UAV Model”, Proceedings of the 10th International Conference on Mechanical Engineering 2013 (ICME2013) held in 20-21 June 2014, Dhaka, Bangladesh. Paper ID No. 008. Procedia Engineering 90 (2014), Elsevier, pp 225-231.
  28. Ghosh, K., Islam, M. Q. and Ali, M., “An Experimental Investigation of Wind Effect on Pentagonal and Hexagonal Staggered Cylinders”, Proceedings of the 10th International Conference on Mechanical Engineering 2013 (ICME2013) held in 20-21 June 2014, Dhaka, Bangladesh. Paper ID No. 258. Procedia Engineering 90 (2014), Elsevier, pp 314-319.
  29. Sarkar, K., Ali, M. and Islam, M. Q., “A Numerical Study on the Physics of Flow Over a Flat Plate With Backward Facing Step”, Proceedings of the 10th International Conference on Mechanical Engineering 2013 (ICME2013) held in 20-21 June 2014, Dhaka, Bangladesh. Paper ID No. 394. Procedia Engineering 90 (2014), Elsevier, pp 351-357.
  30. Hasan, M. N., Samiuzzaman, K., Shavik, S. M., Saha, S. and Islam, M. Q., “Numerical Convection Inside a Nanofluid Square Enclosure in Presence of an External Transverse Magnetic Field”, Proceedings of 6th BSME International Conference on Thermal Engineering, 19-21 December 2014, Dhaka, Bangladesh, Paper ID No. 17.27. Procedia Engineering 105 (2015), Elsevier.
  31. Jahan, S. A., Khan, M. N., Ali, M. and Islam, M. Q., “Effect of Filling Ratio and Working Fluid on Heat Transfer Characteristics”, Proceedings of the 10th International Conference on Mechanical Engineering 2013 (ICME2013) held in 20-21 June 2014, Dhaka, Bangladesh. Paper ID No. 396.
  32. Saha, S., Bhuiyan, F. H., Islam, M. Q. and Ali, M., “Determination of Minor Loss Coefficient of Locally Made PVC Reducers”, Proceedings of the 10th International Conference on Mechanical Engineering 2013 (ICME2013) held in 20-21 June 2014, Dhaka, Bangladesh. Paper ID No. 089.
  33. Ali, M., Mayeed. S., Islam, S. and Islam, M. Q., ”Effect of Weber Number on Disintegration of Liquid Sheet with Co-flowing Gas”, Proceedings of the ASME 2014 International Mechanical Engineering Congress and Exposition, Montreal, Canada, NoV. 14-20, 2014.
  34. Ali, M., Jubery, T., Amin, S. and Islam, M. Q., ”Physics of Supersonic Mixing in Parallel and Non-parallel Streams Passing Over Base Thickness”, Proceedings of 6th BSME International Conference on Thermal Engineering, 19-21 December 2014, Dhaka, Bangladesh, Paper ID No. 4.05. Procedia Engineering 105 (2015), Elsevier, pp 294-301.
  35. Jahan, S. A., Ali, M. and Islam, M. Q., “Effect of Inclination Angles on Heat Transfer Characteristics of a Closed Loop Pulsating Heat Pipe (CLPHP)”, Procedia Engineering 56 (2013), Elsevier, pp 82-87.
  36. Ali, M., Islam, M. Q., Jubery, N. and Amin, S., “Numerical Simulation of Supersonic Mixing Layers for Parallel and Non-Parallel Streams”, Procedia Engineering 56 (2013), Elsevier, pp 187-192.
  37. Raihan, T., Sakib, M. N., Ali, M. and Islam, M. Q., “Both Experimental and Numerical Investigation on Breakup Length of Cylindrical Falling Jet”, Procedia Engineering 56 (2013), Elsevier, pp 462-467.
  38. Barua, H., Nuruzzaman, M., Ali, M. and Islam M. Q., “Effect of Filling Ratio on Heat Transfer Characteristics and Performance of a Closed Loop Pulsating Heat Pipe”, Procedia Engineering 56 (2013), Elsevier, pp 88-95.
  39. Haque, S. and Islam, M. Q., “Experimental Analysis on Minor Loss for Flow Through Locally Manufactured Ball Valve for Supplying Fluid in Bangladesh”, Proceedings of International Conference on Mechanical, Industrial and Materials Engineering, 2013 (ICMIME2013), 1-3 November, 2013, RUET, Rajshahi, Bangladesh, pp 354-359.
  40. Ali, M. and Islam, M. Q., “A Numerical Study on Aerodynamic Effects in the Break-up of Liquid Sheet”, Proceedings of the 14th Asian Congress of Fluid Mechanics – 14ACFM, October 15-19, 2013, Hanoi and Halong, Vietnam.
  41. Afroz, Z., Islam, M. Q. and Ali, M., “Analysis of Dynamic Characteristics of Multi-bladed S-shaped Rotor”, Proceedings of 5th BSME International Conference on Thermal Engineering, 21-23 December 2012, Dhaka, Bangladesh, Paper No. 2.40.
  42. Afroz, Z., Islam, M. Q. and Ali. M., “Study of Aerodynamic Effects on Multi-Bladed S-Shaped Rotor”. Sixth International Mechanical Engineering Conference , 28-29 September, 2012, The Institution of Engineers, Dhaka, Bangladesh. Paper ID Number FM-04.
  43. Shamsun, N., Islam, M. Q. and Ali. M., “Experimental Investigation of Aerodynamic Characteristics of a Stationay Multi-Bladed Savonius Rotor”. Sixth International Mechanical Engineering Conference , 28-29 September, 2012, The Institution of Engineers, Dhaka, Bangladesh. Paper ID Number FM-03.
  44. Islam, M. S., Rahman, N., Islam, M. Q. and Sarker, M. A. R., “Study of Minor Loss Coefficient of Flexible Pipes for Different Bend Angles and Different Bend Radius by Experiment and Simulation”. Sixth International Mechanical Engineering Conference, 28-29 September, 2012, The Institution of Engineers, Dhaka, Bangladesh. Paper ID Number FM-12.
  45. Islam, M. Q., Islam, S. M. N., Sarkar, A. R. and Karim, M. R., “Wind Energy in Bangladesh, Availability and Prospect”, Sixth International Mechanical Engineering Conference , 28-29 September, 2012, The Institution of Engineers, Dhaka, Bangladesh. Paper ID Number ET-11.
  46. Shamsun, N., Islam, M. Q. and Ali. M., “Torque and Drag Characteristics of a Six Bladed Savonius Rotor”. International Conference on the Developments in Renewable Energy Technology (ICDRET 2012), United International University, Bangladesh, January 5-7, 2012. pp 137 - 142.
  47. Zulfa, F., Islam, M. Q. and Ali. M., “Experimental Study on Multi-Bladed Vertical Axis Vane Type Rotor, the Effect of Number of Blades”. International Conference on the Developments in Renewable Energy Technology (ICDRET 2012), United International University, January 5-7, 2012. pp 147 - 150.
  48. Afroz, Z., Islam, M. Q. and Ali. M., “Aerodynamic Studies on Multi-Bladed S-Shaped Vane Type Rotor.” International Conference on the Developments in Renewable Energy Technology (ICDRET 2012), United International University, January 5-7, 2012. pp 133 - 136.
  49. Ahmed, S., Islam, M. Q. and Ali, M., “Determination of Loss Coefficient for Flow Through Flexible Pipes and Bends”. Proceedings of the 9th International Conference on Mechanical Engineering 2011 (ICME2011) 18-20 December 2011, Dhaka, Bangladesh. Paper No. ICME11-FL-045.
  50. Nuruzzaman, M., Ali, M. and Islam M.Q., “Experimental Investigation on Heat Transfer in a Closed Loop Pulsating Heat Pipe”. Proceedings of the 9th International Conference on Mechanical Engineering 2011 (ICME2011) 18-20 December 2011, Dhaka, Bangladesh. Paper No. ICME11-TH-015.
  51. Nahar, S., Islam M.Q. and Ali, M., “Aerodynamic Characteristics of a Six Bladed Savonius Rotor”. Proceedings of the 9th International Conference on Mechanical Engineering 2011 (ICME2011) 18-20 December 2011, Dhaka, Bangladesh. Paper No. ICME11-FL-041.
  52. Afroz, Z., Islam. M. Q. and Ali, M., “An Experimental Investigation of Multi-Bladed S-Shaped Vane Type Rotor”. Proceedings of the 9th International Conference on Mechanical Engineering 2011 (ICME2011) 18-20 December 2011, Dhaka, Bangladesh. Paper No. ICME11-FL-043.
  53. Zulfa, F., Islam, M. Q. and Ali, M., “Dynamic Characteristics of a Vertical Axis Vane Type Wind Turbine”. Proceedings of the 9th International Conference on Mechanical Engineering 2011 (ICME2011) 18-20 December 2011, Dhaka, Bangladesh. Paper No. ICME11-FL-044.
  54. Ali, M., Umemura, A. and Islam, M. Q., :Numerical Investigatioon on the Behavior of Moving Liquid Sheet”, Proceedings of the 9th International Conference on Mechanical Engineering, 18-20 December, 2011, Dhaka, Bangladesh, Paper No. ICME 11-FL-052.
  55. Ali, M. and Islam, M. Q., “Dynamics and Disintegration of Liquid Column and Sheet”, Proceedings of Conference on Applied Mechanics and Manufacturing (ICAMM) 2010, 13-15 December 2010, Sultan Qabaos University, Oman. pp. 330-335.
  56. Islam, M. Q., Ali, M. and Rahman, M. H., “Theories of Wind Turbines and Recent Development of Wind Energy”, Proceedings of the 13th Asian Congress of Fluid Mechanics, 17-21 December 2010, Dhaka, Bangladesh. pp. 1175-1182.
  57. Ali, M., Islam, M. Q. and Islam, A. K. M., “Dynamic Behaviour and Disintegration of Liquid Sheet”, 13th APM, Mechanical Engineering Division, IEB, Dhaka, Paper No. MED03, 25 September 2010.
  58. Hasan, N. M., Islam, M. Q., Saha, S. and Saha, G. “Effect of Internal Heat Generation or Absorption on Mixed Convection Characteristics in a Tilted Lid-Driven Square Enclosure”, 13th APM, Mechanical Engineering Division, IEB, Dhaka, Paper No. MED08, 25 September 2010.
  59. Hasan, M. N., Saha, S., Saha, G. and Islam, M. Q., “Effect of Sidewall Inclination of a Lid-Driven Trapezoidal Enclosure on Mixed Convective Flow and Heat Transfer Characteristics”, Proceedings of the 13th Asian Congress of Fluid Mechanics, 17-21 December 2010, Dhaka, Bangladesh. pp. 763-766.
  60. Ali, M., Islam. M. Q. and Islam, A. K. M. S., “Characteristics of Capillary Wave During Disintegration of Liquid Column”, Proceedings of the 13th Asian Congress of Fluid Mechanics, 17-21 December 2010, Dhaka, Bangladesh. pp. 264-267.
  61. Haque, M. F., Haider, F., Rahman, A. and Islam, M. Q., “Study of Different Types of Valves and Determination of Minor Head Loss for Various Openings of Locally Available Plastic Valve”, Proceedings of the 13th Asian Congress of Fluid Mechanics, 17-21 December 2010, Dhaka, Bangladesh. pp. 605-608.
  62. Ali. M., Akira, U. and Islam, M. Q., “Disintegration of Liquid Sheet with Co-flowing Gas”, Proceedings of the 13th Asian Congress of Fluid Mechanics, 17-21 December 2010, Dhaka, Bangladesh. pp. 1051-1054.
  63. Saha, S., Hasan, M. N., Saha, G. and Islam, M. Q., “Effect of Inclination Angle on Mixed Convection in a Lid-Driven Square Enclosure with Internal Heat Generation or Absorption”, Proceeding of International Conference on Mechanical, Industrial and Energy Engineering 2010, 23-2 December, 2010, Khulna, Bangladesh. pp. MIE10-149-1 to 6.
  64. Ali, M., Islam, M. Q. and Mahamud, R., “Effect of Gas Weber Number on Liquid Sheet Breakup”, 8th International Conference on Mechanical Engineering, Paper No. ICME09-FM-30, ICME 2009, BUET, Dhaka, 26-28 December 2009.
  65. Ali, M., Islam, M. Q., Jubery, TAGN and Nazrul, S. M. N., “Mixing of Supersonic Jets with Different Merging Angles for Constant Inlet Pressure and Velocity, 8th International Conference on Mechanical Engineering, Paper No. ICME09-FM-29, ICME 2009, BUET, Dhaka, 26-28 December 2009.
  66. Nazma, S. and Islam, M. Q., “Performance of a Low Cost Circular Arc Horizontal Axis Wind Turbine”, 8th International Conference on Mechanical Engineering, Paper No. ICME09-FM-19, ICME 2009, BUET, Dhaka, 26-28 December 2009.
  67. Hoque, R., Ali, M. and Islam, M. Q., “Numerical Study on Mixing Flow Field with Different Angles into a Supersonic Flow”, 8th International Conference on Mechanical Engineering, Paper No. ICME09-FM-32, ICME 2009, BUET, Dhaka, 26-28 December 2009.
  68. Kamal, F. M. and Islam, M. Q., “Performance of a Stationary Vertical Axis Vane Type Rotor Tested in a Wind Tunnel”, Proceedings of the First International Conference on the Developments in Renewable Energy Technology (ICDRET 2009), United International University, December 17-19, 2009. pp 42-46.
  69. Saha, G., Saha, S. and Islam, M. Q., “A Numerical Validation of Natural Convection Inside a Square Enclosure with Isothermal Discrete Bottom Heating”, International Physics Conference, Bangladesh Physical Society, 15-17 May 2009. Paper No. VIII-CP 01
  70. Islam, A. K. M. S., Saha, G., Saha, S. and Islam, M. Q. “Effect of Inclination Angle on Mixed Convection in a Lid-Driven Enclosure with Internal Heat Generation”, The 12th Asian Congress of Fluid Mechanics, Paper No. W-3FF-4, Daejeon, Korea, August 18-21, 2008.
  71. Mukut, A. N. M., Islam, M. Q. and Alam, M. M., “Investigation of Wind Characteristics in Coastal Region in Bangladesh”, Proceedings of the 12th Annual Paper Meet, Paper No. 123-EN01, IEB, Dhaka, Bangladesh, February 8-9, 2008.
  72. Saha, G., Saha, S., Maleque, M. A., Chowdhury, M. M. K. and Islam, M. Q., “Mixed Convection Inside a Lid-Driven Parallelogram Cavity with Isoflux Heating from Below”, Proceedings of the 12th Annual Paper Meet, Paper No. 192-EN01, IEB, Dhaka, Bangladesh, February 8-9, 2008.
  73. Saha, G., Saha, S. and Islam, M. Q., “Mixed Convection Heat Transfer in a Vented Cavity with Multiple Discrete Heaters and Outlet Openings”, Bose Conference on Contemporary Physics-08, Paper No. CSFM-4, University of Dhaka, 19-21 March, 2008.
  74. Ali, M., Umemura, A. and Islam, M. Q., “Contraction of Liquid Sheet in a Still Gas Medium”, Proceedings of 4th BSME-ASME International Conference on Thermal Engineering, 27-29 December 2008, Dhaka, Bangladesh, Paper No.101.
  75. Kamal, F. M. and Islam, M. Q., “Drag and Torque Characteristics of a Five Bladed Vertical Axis Vane Type Wind Turbine”, Proceedings of the International Conference on Chemical Engineering 2008 ICChE2008, 29-30 December, Dhaka, Bangladesh, Paper No.25.
  76. Mukut, A. N. M., Islam, M. Q. and Alam, M. M., “Estimation of Wind Energy Potential in Coastal Areas of Bangladesh Using Weibull Distribution”, Proceedings of 4th BSME-ASME International Conference on Thermal Engineering, 27-29 December 2008, Dhaka, Bangladesh, Paper No.037.
  77. Kamal, F. M. and Islam, M. Q., “Drag and Torque Coefficients of a Stationary Six Bladed Vertical Axis Vane Type Rotor”, Proceedings of 4th BSME-ASME International Conference on Thermal Engineering, 27-29 December 2008, Dhaka, Bangladesh, Paper No.041.
  78. Islam, A. N. M. M., Islam, M. Q. and Alam, M. M., “The Wind Energy Scenario in Coastal Region of Bangladesh”, Proceedings of the 7th International Conference on Mechanical Engineering 2007 (ICME2007) 29-31 December 2007, Dhaka, Bangladesh. Paper No. ICME07-FL-22. pp. 1 - 4
  79. Ali, M., Islam, M. and Islam, M. Q., “A Numerical Investigation on Mixing of Two Non-Parallel Streams”, Proceedings of the Eleventh Asian Congress of Fluid Mechanics, 22-25 May 2006, Kuala Lumpur, Malaysia, pp. 732-737.
  80. Ali, M., Islam, S., Islam, M. Q. and Saha, S., “Physics of Hydrogen Mixing With Air Behind Finite Thickness Base”, Proceedings of the International Conference on Fluid and Thermal Energy Conversion 2006, Jakarta, Indonesia, December 10-14, 2006. pp. 101-107.
  81. Saha, S., Ali, M., Mamun, M. A. H. and Islam, M.Q., “Effect of Corrugation Frequency on Mixed Convection in a Vented Enclosure of Vee-Corrugated Vertical Walls”, Proceedings of 3rd BSME-ASME International Conference on Thermal Engineering, 20-24 December 2006, Dhaka, Bangladesh, Paper No. BA-132.
  82. Islam, M. T., Saha, S., Ali, M. and Islam, M. Q., “Numerical Analysis of Mixed Convection in a Channel With an Open Enclosure for Discrete Bottom Heating”, Proceedings of the 11th Annual Paper Meet, Mechanical Engineering Division, Paper No. TF17, The Institution of Engineers, Bangladesh, 25-26 December 2006, Dhaka. pp 13-18.
  83. Ali, M., Islam, M. Q. and Morshed, M., “Mixing of Shear Layer Behind Finite Thickness Base”, Proceedings of 5th International Mechanical Engineering Conference and 10th Annual Paper Meet, IEB, 30 September-2 October 2005, Dhaka, Bangladesh, pp 181-186.
  84. Islam, M. Q., Mandal, A. C. and Hasan, M. S., “Performance Prediction of Wind Turbines and Their Prospect”, Proceedings of the short training course on New and Renewable Energy : Need, Accessibility and Sustainability, Islamic University of Technology (IUT), Dhaka, Bangladesh., December 2005. Lecture No. 5.5, pp 1-19.
  85. Islam, M. Q., Hasan, M. N. and Saha, S., “Experimental Investigation of Aerodynamic Characteristics of Two, Three and Four Bladed S-shaped Stationary Rotors”, Proceedings of the International Conference on Mechanical Engineering 2005 (ICME2005) 28-30 December 2005, Dhaka, Bangladesh. Paper No. FL-23, pp 1-4.
  86. Ali, M., Islam, M. Q. and Morshed, M., “Flow Characteristics of Two Non-Parallel Streams Behind a Finite Thickness Base”, Proceedings of the International Conference on Mechanical Engineering 2005 (ICME2005) 28-30 December 2005, Dhaka, Bangladesh. Paper No. FL-25, pp. 1-6.
  87. Ahmmed S. and Islam M. Q., “Wind Energy Potential at the Coastal Regions of Bangladesh for Irrigation and Agricultural Application”, Proceedings of 2nd BSME-ASME International Conference on Thermal Engineering, 2-4 January 2004, pp 917-925.
  88. Bhuiyan M. H. K. and Islam M. Q., “Static Torque and Drag Characteristics of a Four Bladed Savonius Rotor and Prediction of Dynamic Characteristics”, Proceedings of 2nd BSME-ASME International Conference on Thermal Engineering, 2-4 January 2004, pp 938-946.
  89. Chowdhury F. H. and Islam M. Q., “Present Air Pollution Scenario in Bangladesh”, Proceedings of 2nd BSME-ASME International Conference on Thermal Engineering, 2-4 January 2004, pp 1000-1007.
  90. Kamal I. and Islam M. Q., “Design and Performance of Horizontal Axis Wind Turbine at Different Wind Conditions”, International Conference on Physics for Understanding and Applications, Bangladesh Physical Society, 22-24 February 2004. Paper No. EEP-4
  91. Kamal, I. and Islam, M. Q., “Design of a Windmill That Can be Manufactured by Locally Available Technology”, International Conference on Physics for Understanding and Applications, Bangladesh Physical Society, 22-24 February 2004. Paper No. EEP-3
  92. Ahmmed S. and Islam M. Q., “Wind Power for Rural Areas of Bangladesh”, Proceedings of 3rd International Conference on Electrical & Computer Engineering, ICECE 2004, 28-30 December 2004, Dhaka, Bangladesh, pp 192-197.
  93. Islam, M. Q., Hasan, M. S. and Bhuiyan, H. K., “An Experimental Investigation of a Stationary Four-Bladed Savonius Rotor”, Proceedings of 4th International Mechanical Engineering conference & 9th Annual Paper Meet, IEB, 29-31 December 2004, Dhaka, Bangladesh, pp 214-220.
  94. Ahmmed, S. and Islam, M. Q., “Renewable Energy for Agricultural Irrigation in Selected Areas of Bangladesh”, Proceedings of 4th International Mechanical Engineering Conference & 9th Annual Paper Meet, IEB, 29-31 December 2004, Dhaka, Bangladesh, pp 221-226.
  95. Islam M. Q., Mandal A. C. and Chowdhury F. H., “Aerodynamics and Prospects of Wind Turbines”, Proceedings of the 3rd International Conference on Renewable Energy for Sustainable Development, IEB, 2-4 October, 2003, Dhaka Bangladesh, pp 33 – 52.
  96. Ahmmed S. and Islam M. Q., “Wind Data Analysis for Studying the Feasibility of Using Wind Turbine for Agricultural Applications”, Proceedings of the 3rd International Conference on Renewable Energy for Sustainable Development, IEB, 2-4 October, 2003, Dhaka Bangladesh, pp 227 – 24.
  97. Islam, A. K. M., Islam, M. Q. and Infield, D. G., “Harnessing the Energy From River Current for Small Scale Electricity Generation”, Proceedings of Second International Conference on Energy Research & Development (ICERD-2), Vol.-2, April 8-10, 2002, Kuwait. pp. 685-690
  98. Islam, A. K. S., Islam, M. Q. and Infield, D., G., “Development of a Model Water Current Turbine and its Applications in Bangladesh”, Proceedings of the World Renewable Congress VII (WREC 2000), June 29 – July 3, 2002, Cologne, Germany. pp. 485-490.
  99. Islam, A. K. S., Islam, M. Q. and Infield, D., G., “Harnessing the Energy from River Current for Small Scale Electricity Generation in Bangladesh”, Proceedings of the Second International Conference on Energy Research and Development (ICERD-2), April 2002, Kuwait, Vol.- II, pp. 685-690.
  100. Ahmed, S., Islam, M. Q. and Islam, A. K. M. S., “Design Characteristics and Performance of a Horizontal Axis Wind Turbine Model for Water Pumping in Bangladesh”, Proceedings of BSME-ASME International Conference on Thermal Engineering, 31st Dec.- 2nd Jan. 2002, Dhaka, Bangladesh. pp. 613-622.
  101. Islam, A. K. M. S., Islam, M. Q., Rahman, K. M. and Khan, M. R., “Developing a Pedaling Generator for Household Electricity Supply in Rural Bangladesh: A Feasibility Study”, Proceedings of the International Conference of Renewable Energy for Rural Development, 19 – 21 January, 2002, Dhaka, Bangladesh. pp. 281-284.
  102. Mamun, N. H. A., Islam, M. Q., Islam, A. K. M. S. and Infield, D. G., " Development of River Current Turbine Model and its Application for Power Generation in Bangladesh", Proceedings of the International Conference of Renewable Energy for Rural Development, 19 – 21 January, 2002, Dhaka, Bangladesh. pp. 211-218.
  103. Begum, H. A., Mandal, A. C. and Islam, M. Q., “A Comparative Study of Performance Analysis of a Horizontal Axis Wind Turbine”, Proceedings of the International Conference of Renewable Energy for Rural Development, 19 – 21 January 2002, Dhaka, Bangladesh. Vol. 4, pp. 89-94.
  104. Islam, M. Q., “Wind Turbine for Irrigation”, Proceedings of the Workshop on Renewable Energy Technology for Rural Development, Islamic University of Technology (IUT), The Organization of the Islamic Conference (OIC), Dhaka, 10 – 12 December, 2002, pp 67-73.
  105. Islam, M. Q., “Wind Energy for Power Generation”, Proceedings of the Workshop on Renewable Energy Technology for Rural Development, Islamic University of Technology (IUT), The Organization of the Islamic Conference (OIC), Dhaka, 10 – 12 December, 2002, pp 74 – 92.
  106. Islam, A. K. M., Islam, M. Q., Hossain, M. Z., Khan, M. I. and Uddin, S. A., “Appropriate Low Head Micro Hydro Systems for Bangladesh”, Proceedings of Second International Conference on Electrical and Computer Engineering (ICECE2002), December 26-28, 2002, Dhaka, Bangladesh, pp. 216 - 219.
  107. Ahmmed, S. and Islam, M. Q., “Wind Resources Utilization for Water Pumping in Bangladesh”, Proceedings of the Second Annual Paper Meet, Agricultural Engineering Division, The Institution of Engineers, Bangladesh, 20 November 2002, pp. 152 – 163.
  108. Islam, A. K. S., Al-Mamun, N. H., Islam, M. Q. and Infield, D., G., “Energy from River Current for Small Scale Electricity Generation in Bangladesh”, Proceedings of the Conference C76 of the Solar Energy Society, REMIC, 10-11 September 2001, Belfast, U.K. pp. 207-213.
  109. Al-Mamun, N. H., Islam, M. Q., Islam, A. K. M. S. and Infield, D. G., “Potential of River Current Utilization for Small Scale Electricity Generation in Bangladesh”, Proceedings of International Conference on Electrical and Computer Engineering, January 5-6, 2001, Dhaka, Bangladesh. pp. 189-192.
  110. Islam, A. K. M. S., Al-Mamun, N. H., Islam, M. Q., Ali, M. and Infield, D. G., “Study of a Model Water Current Turbine for Application in Bangladesh”, Proceedings of National Seminar on Utilization of Renewable Energy in Rural Areas of Bangladesh (UREAB), BIT, Khulna, 9-10 November, 2001, pp.86-93.
  111. Ahmed, S., Islam, M. Q. and Islam, A. K. M. S., “A Study of Prospects of Wind Resources for Water Pumping and Electricity Generation in Bangladesh”, Proceedings of International Conference on Mechanical Engineering, December 26-28, 2001, BUET, Dhaka, Bangladesh. Volume-II, Section-I, pp. 53-59.
  112. Hossain, A., Bachhar, S., Islam, M. Q. and Islam, A. K. M. S., “Effect of Height of Sink Location on Drawdown from a Two Layered Fluid Body Through Round Hole”, Proceedings of International Conference on Mechanical Engineering, December 26-28, 2001, BUET, Dhaka, Bangladesh. Volume-II, Section-IV, pp. 107-111.
  113. Al Mamun, N. H., Islam, M. Q., Islam, A. K. M. S. and Infield, D. G., “Zero Head Water Turbine for Small Scale Electricity Generation in Bangladesh” Proceedings of International Conference on Mechanical Engineering, December 26-28, 2001, BUET, Dhaka, Bangladesh. Volume-II, Section-I, pp. 107-112.
  114. Islam, A. K. S., Islam, M. Q. and Hussain, S. S., “Wind Power Utilization for Water Pumping in Bangladesh”, Proceedings of World Renewable Energy Congress VI, July 1-7, 2000, Brighton, U K. pp. 1229-1232
  115. Islam, A. K. M., Islam, M. Q. and Infield, D. G., “River Current Turbines for Electricity Generation”, Proceedings of the International Conference and Workshop on Critical Issues in Energy and Development-Challenges for the OIC Countries, 20-23, November, 2000, Dhaka. pp. 139-143
  116. Hussain, A. K. M. I., Islam, M. Q. and Islam, A. K. M. S., “Horizontal Axis Wind Turbine and Its Application for Water Pumping in Bangladesh”, Proceedings of the International Conference and Workshop on Critical Issues in Energy and Development-Challenges for the OIC Countries, 20-23, November, 2000, Dhaka. pp. 153-170.
  117. Hossain, S. S., Islam, M. Q. and Islam, A. K. M. S., “Aerodynamic Characteristics of Static Two and Three-Bladed Savonius Rotor”, Proceedings of the International Conference and Workshop on Critical Issues in Energy and Development-Challenges for the OIC Countries, 20-23, November, 2000, Dhaka. pp. 171-178.
  118. Rahman, M., Islam, M. Q. and Islam, A. K. M. S., “Static Torque and Drag Characteristics of a Three Bladed Savonius Rotor”, Proceedings of the Sixth Annual Paper Meet and International Conference 2000, Mechanical Engineering Division, The Institution of Engineers, Bangladesh, January 27-29, 2000. pp. 196-205.
  119. Islam, M. Q., Islam, A. K. M. S. and Hossain, M. I., “Design and Construction of a Portable Floating Dome Biogas Plant”, Proceedings of the Sixth Annual Paper Meet and International Conference 2000, Mechanical Engineering Division, The Institution of Engineers, Bangladesh, January 27-29, 2000. pp. 276-280.
  120. Islam, M. Q. and Islam, A. K. M. S., “Static Torque and Drag Characteristics of Savonius and S-Shaped Savonius Rotor”, Proceedings of the Third Jordanian Mechanical and Industrial Engineering Conference, 9-11 May, 1999, Amman, Jordan. pp. 215-222
  121. Islam, M. Q. and Islam, A. K. M. S., “Assessment of Wind Power in Bangladesh”, Proceedings of the Third Jordanian Mechanical and Industrial Engineering Conference, 9-11 May, 1999, Amman, Jordan. pp. 205-213
  122. Islam, M. Q. and Islam, A. K. M. S., “Aerodynamic Characteristics of Stationary SShaped Rotors”, Proceedings of the Eighth Asian Congress of Fluid Mechanics, December 6–10, 1999, Shenzhen, China. pp. 377-381
  123. Islam, M. Q., Islam, A. K. M. S. and Bachhar, S., “Drawdown from a Two Layer Fluid Body through a Capped Round Hole”, Proceedings of the Eighth Asian Congress of Fluid Mechanics, December 6–10, 1999, Shenzhen, China. pp. 720-723
  124. Mandal, A. C. and Islam, M. Q., “Theories of Wind Machines and Their Performances”, Second International Seminar on Renewable Energy for Poverty Alleviation, IEB, Dhaka, November 26-27, 1999. pp. 22-53.
  125. Rahman, M., Islam, M. Q. and Islam, A. K. M. S., “Aerodynamic Characteristics of a Three Bladed Savonius Rotor”, Second International Seminar on Renewable Energy for Poverty Alleviation, IEB, Dhaka, November 26-27, 1999. pp. 322-334.
  126. Islam, M. Q., Islam, A. K. M. S. and Hossain, M. I., “Design and Construction of a Portable Biogas Plant”, Second International Seminar on Renewable Energy for Poverty Alleviation, IEB, Dhaka, November 26-27, 1999. pp. 434-438.
  127. Rahman, M., Islam, M. Q. and Islam, A. K. M. S., “Prediction of Dynamic Characteristics of a Three Bladed Savonius Rotor”, Proceedings of the Third International Conference on Fluid Mechanics and Heat Transfer, December 15-16, 1999, Dhaka, Bangladesh. pp. 374-383.
  128. Islam, M., Q., “Horizontal Axis Wind Turbine”, Proceedings on Renewable Energy Education and Application for Rural Communities in Bangladesh, Centre for Energy Studies, BUET, Dhaka, Bangladesh, Nov. 27- Dec. 03, 1999. pp. 281-305.
  129. Islam, M. Q. and Islam, A. K. M. S., “Wind Power in Bangladesh”, International Conference on Role of Renewable Energy Technology for Rural Development”, (RETRUD-98) 12-14 October 1998, Kathmandu, Nepal. (only long abstract published). pp.5.
  130. Islam, A. K. M. S. and Islam, M. Q., “Estimation of Static torque and Drag Characteristics of Savonius and S-Shaped Savonius Rotor”, International Conference on Role of Renewable Energy Technology for Rural Development”, (RETRUD-98) 12-14 October 1998, Kathmandu, Nepal. (only long abstract published). pp.6.
  131. Islam, M. Q., Islam, A. K. M. S. and Rahman, M., “Feasibility of Horizontal Axis Sailwing Rotor for Lifting Water in Bangladesh”, Proceedings of Fifth Annual Paper Meet, The Institution of Engineers, Bangladesh, November 5-7, 1998. pp. 129-136.
  132. Islam, M. Q. Islam, A. K. M. S. and Al-Nur, M., “Aerodynamic Characteristics of an S-Shaped Savonius Rotor”, Proceedings of International Symposium on Advanced in Alternative & Renewable Energy, July 22-24, 1997, Johor Bahru, Malaysia. pp. 372-380
  133. Islam, M. Q. and Islam, A. K. M. S., “Feasibility of Wind Energy in Bangladesh”, Proceedings of International Symposium on Advanced in Alternative & Renewable Energy, July 22-24, 1997, Johor Bahru, Malaysia. pp. 358-364
  134. Islam, M. Q., Islam, A. K. M. S. and Razzaque, M. M., “An Experimental Investigation of Selective Withdrawal from a Two Layered Fluid Body Through a Round Hole”, Proceedings of the Seventh Asian Congress of Fluid Mechanics, December 8-12, 1997, I.I.T. Madras, India. pp. 821-824
  135. Islam, M. Q. and Mandal, A. C., “Study of Wind Turbine and Feasibility of Wind Energy in Bangladesh”, Proceedings of National Seminar on Renewable Energy for Poverty Alleviation, October 21-23, 1997, Dhaka, Bangladesh. pp. 161-182.
  136. Hossain, K. A. and Islam, M. Q., “Yaw Stability of a Downwind Horizontal Axis Wind Turbine”, Proceedings of National Seminar on Renewable Energy for Poverty Alleviation, October 21-23, 1997, Dhaka, Bangladesh. pp. 199-206.
  137. Islam, M. Q. Islam, A. K. M. S. and Razzaque, M. M., “Drawdown From a Two Layered Fluid Body Through a Round Hole”, Proceedings of the Second International Conference on Hydrodynamics, Hong Kong, 16-19 December, 1996. pp. 919-924
  138. Islam, M. Q., Hossain, M., Naser, J. A. and Islam, A. K. M. S., “Effect of Inlet Condition on the Structure of Laminar Flow in an Asymmetric Channel Expansion”, Proceedings of the Sixth Asian Congress of Fluid Mechanics, 22 to 26 May, 1995, Singapore. pp. 935-938
  139. Islam, M. Q. Islam, A. K. M. S. and Razzaque, M. M., “An Investigation of Selective Withdrawal Through a Round Hole from a Two Layered Fluid System”, Proceedings of the Sixth Asian Congress of Fluid Mechanics, 22 to 26 May, 1995, Singapore. pp. 1094-1098
  140. Kamal, I. and Islam, M. Q., “Study of the Design and Performance of a Horizontal Axis Wind Turbine at Various Wind Condition of Bangladesh”, Abstracts of Bangladesh Association for the Advancement of Science, 18th Bangladesh Science Conference, BAU, Mymensingh, Bangladesh, 1994. pp. 12.
  141. Kamal, I. and Islam, M. Q., “Study of a Wind Powered Water Pumping Set for Bangladesh at Different Wind Conditions”, Proceedings of the First Annual Paper Meet of Mechanical Engineering Division, October 26-29, 1994, BIT, Khulna, Bangladesh. pp. 195-211.
  142. Kamal, I. and Islam, M. Q., “Analysis and Performance of a Horizontal Axis Wind Turbine for Bangladesh”, Presented at the Technical Session of the 36th Convention, Institute of Engineers, Dhaka, Bangladesh, 1992
  143. Islam, S. M. N., Khan, M. H. and Islam, M. Q., “An Overview of Wind Energy and its Prospects in Bangladesh”, Conference Proceedings of Energex, 1988, Tripoli, Libya. pp. 33-39
  144. Islam, M. Q., Mandal, A. C. and Das, D. K., “A Theoretical Investigation of Performance Characteristics of Wind Turbines”, Proceedings of the Seminar on Technology for Self-Reliance and Development, BUET, Dhaka, November 2-3, 1988
  145. Hirsch, Ch., Derdelinckx, R. and Islam, M. Q., “A Theoretical Investigation of the Design of a Horizontal Axis Wind Turbine”, Proceedings of the European Wind Energy Conference, Hamburg, Germany, 22-26 October 1984. pp. 124-129
  146. Islam, S. M. N. and Islam, M. Q., “Wind Energy and its Prospects”, Proceedings of the National Seminar on Energy for Development, Dhaka, AEC, Bangladesh, May 24-25, 1981